계산 툴
데이터시트
TPS54060A
- 3.5V to 60V Input Voltage Range
- 200-mΩ High-Side MOSFET
- High Efficiency at Light Loads with a Pulse
Skipping Eco-Mode™ - Tighter Enable Threshold than TPS54060
for More Accurate UVLO Voltage - Adjustable UVLO Voltage and Hysteresis
- 116µA Operating Quiescent Current
- 1.3µA Shutdown Current
- 100kHz to 2.5MHz Switching Frequency
- Synchronizes to External Clock
- Adjustable Slow Start/Sequencing
- UV and OV Power Good Output
- 0.8-V Internal Voltage Reference
- MSOP-10 and 3mm × 3mm VSON-10
Package With PowerPAD™ - Supported by WEBENCH® and SwitcherPro™
Software Tool
The TPS54060A device is a 60V, 0.5A, step down regulator with an integrated high side MOSFET. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no load, regulated output supply current to 116µA. Using the enable pin, shutdown supply current is reduced to 1.3µA, when the enable pin is low.
Under voltage lockout is internally set at 2.5V, but can be increased using the enable pin. The output voltage startup ramp is controlled by the slow start pin that can also be configured for sequencing/tracking. An open drain power good signal indicates the output is within 94% to 107% of its nominal voltage.
A wide switching frequency range allows efficiency and external component size to be optimized. Frequency fold back and thermal shutdown protects the part during an overload condition.
기술 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기6 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS54060A 0.5-A, 60-V Step-Down DC–DC Converter With Eco-Mode™ datasheet (Rev. C) | PDF | HTML | 2016/01/15 |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Application note | Design Considerations for DC-DC Converters in Fast-Input Slew Rate Applications | 2015/03/05 | ||
| Application note | Methods to Improve Low Dropout Operation with the TPS54240 and TPS54260 (Rev. A) | 2013/11/06 | ||
| Application note | Differences between the TPS54x40, TPS54x60 and the TPS54x40A, TPS54x60A | 2013/04/17 | ||
| Application note | Level Shifting Control for an Inverting Buck-boost | 2012/10/10 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
EVM430-F67641 — MSP430F67641 SoC를 지원하는 다상 전기 계량기
This EVM implements a complete smart meter design using the MSP430F67641 polyphase metering System on Chip. The design meets all requirements for ANSI/IEC Class 0.5 accuracy. The F67641 SoC features 128KB of on-chip flash plus a 320-segment LCD controller for a single-chip solution to low-cost (...)
평가 보드
TPS54060EVM-457 — TPS54060 48V 입력, 3.3V 출력, 0.5A 평가 모듈
The TPS54060 dc/dc converter is designed to provide up to a 0.5-A output from an input voltage source of 3.5 V to 60 V. This evaluation module is designed to demonstrate the small, printed-circuit-board areas that may be achieved when designing with the TPS54060 regulator. The switching frequency (...)
사용 설명서: PDF
평가 보드
TPS54060EVM-590 — 100mA 분할 레일 SWIFT™ 컨버터 평가 모듈
The TPS54060 DC/DC converter is designed to provide up to a 0.5-A output from an input voltage source of 3.5V to 60V. Rated input voltage and output current range for the TPS54060EVM-590 evaluation module are given in Table 1 of the User Guide. This evaluation module is designed to demonstrate (...)
사용 설명서: PDF
시뮬레이션 모델
TPS54060 TINA-TI Transient Reference Design
SLIM138.TSC (470 KB) - TINA-TI Reference Design
레퍼런스 디자인
TIDA-00179 — 절대 위치 인코더에 대한 범용 디지털 인터페이스 레퍼런스 디자인
TIDA-00179 is an EMC-compliant universal digital interface to connect to absolute position encoders like EnDat 2.2, BiSS®, SSI or HIPERFACE DSL®. This reference design supports a wide-input voltage range from 15 V to 60 V (24-V nom). A connector with 3.3-V logic I/O signals allows for (...)
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| HVSSOP (DGQ) | 10 | 옵션 보기 |
| VSON (DRC) | 10 | 옵션 보기 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치