전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS631000

활성

1.5A 출력 전류, 높은 전력 밀도 벅 부스트 컨버터

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck-Boost Type Converter Iout (max) (A) 2 Vin (min) (V) 1.6 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200 Features Enable, Light Load Efficiency, Load Disconnect, Synchronous Rectification, UVLO Fixed Vout (min) (V) 1.2 Vout (max) (V) 5.3 Iq (typ) (A) 0.000008
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck-Boost Type Converter Iout (max) (A) 2 Vin (min) (V) 1.6 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200 Features Enable, Light Load Efficiency, Load Disconnect, Synchronous Rectification, UVLO Fixed Vout (min) (V) 1.2 Vout (max) (V) 5.3 Iq (typ) (A) 0.000008
SOT-5X3 (DRL) 8 3.36 mm² 2.1 x 1.6
  • 1.6-V to 5.5-V input voltage range
    • Device input voltage > 1.65 V for start-up
  • 1.2-V to 5.3-V output voltage range (adjustable)
  • High output current capability, 3-A peak switch current
    • 2-A output current for VIN ≥ 3 V, VOUT = 3.3 V
    • 1.5-A output current for VIN ≥ 2.7 V, VOUT = 3.3 V
  • High efficiency over the entire load range
    • 8-µA typical quiescent current
    • Power save mode
  • 150-mV load-step response at a 1-A current step
  • Peak current buck-boost mode architecture
    • Seamless mode transition with < 20-mV output ripple
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
    • Fixed-frequency operation with 2-MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • Small solution size
    • Small 1-µH inductor
    • Works with one 0805 output capacitor over the full VOUT range
  • Create a custom design using the TPS631000 with the WEBENCH Power Designer
  • 1.6-V to 5.5-V input voltage range
    • Device input voltage > 1.65 V for start-up
  • 1.2-V to 5.3-V output voltage range (adjustable)
  • High output current capability, 3-A peak switch current
    • 2-A output current for VIN ≥ 3 V, VOUT = 3.3 V
    • 1.5-A output current for VIN ≥ 2.7 V, VOUT = 3.3 V
  • High efficiency over the entire load range
    • 8-µA typical quiescent current
    • Power save mode
  • 150-mV load-step response at a 1-A current step
  • Peak current buck-boost mode architecture
    • Seamless mode transition with < 20-mV output ripple
    • Forward and reverse current operation
    • Start-up into pre-biased outputs
    • Fixed-frequency operation with 2-MHz switching
  • Safety and robust operation features
    • Overcurrent protection and short-circuit protection
    • Integrated soft start with active ramp adoption
    • Overtemperature protection and overvoltage protection
    • True shutdown function with load disconnect
    • Forward and backward current limit
  • Small solution size
    • Small 1-µH inductor
    • Works with one 0805 output capacitor over the full VOUT range
  • Create a custom design using the TPS631000 with the WEBENCH Power Designer

The TPS631000 is a constant frequency peak current mode control buck-boost converter. The device has a 3-A peak current limit (typical) and 1.6-V to 5.5-V input voltage range. The TPS631000 provides a power supply solution for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPS631000 automatically operates in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8-µA quiescent current and power save mode power enable the highest efficiency for light to no-load conditions.

The TPS631000 offers a very small solution size with a 1.2-mm × 2.1-mm SOT-583 package, a 1-µH inductor, and one 0805 output capacitor.

The TPS631000 is a constant frequency peak current mode control buck-boost converter. The device has a 3-A peak current limit (typical) and 1.6-V to 5.5-V input voltage range. The TPS631000 provides a power supply solution for system pre-regulators and voltage stabilizers.

Depending on the input voltage, the TPS631000 automatically operates in boost, buck, or in 3-cycle buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes happen at a defined duty cycle and avoid unwanted toggling within the modes to reduce output voltage ripple. 8-µA quiescent current and power save mode power enable the highest efficiency for light to no-load conditions.

The TPS631000 offers a very small solution size with a 1.2-mm × 2.1-mm SOT-583 package, a 1-µH inductor, and one 0805 output capacitor.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS631010 활성 3A 피크 전류 고효율 초소형 솔루션 크기 벅-부스트 컨버터 TPS631010 has smaller WCSP package and wider output voltage range
신규 TPS631011 활성 1.5A 출력 전류 벅 부스트 컨버터 Similar specification, but non-I2C with SOT package
신규 TPS631013 활성 1.6V ~ 5.5V 입력 전압 1.5A 벅 부스트 컨버터(WCSP에 I2C 포함) Similar specification, but non-I2C with SOT package
TPS63810 활성 동적 전압 스케일링을 위한 I²C 인터페이스를 지원하는 2.5A 고효율 벅 부스트 컨버터 With I2C and larger current capability
TPS63901 활성 WCSP 패키지에서 75nA 작동 IQ를 지원하는 5.5V 벅 부스트 컨버터 Lower IQ and smaller size, with adjustable current limit

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기2
유형 직함 날짜
* Data sheet TPS631000 1.5-A Output Current, High Power Density Buck-Boost Converter datasheet (Rev. B) PDF | HTML 2022/06/20
Application note 배터리로 구동되는 카메라 및 비디오 초인종을 위한 전원 레일 설계 PDF | HTML 2023/09/19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS631000EVM — TPS631000 고전력 밀도 벅 부스트 컨버터 평가 모듈

TPS631000은 정주파 피크 전류 모드 제어 벅-부스트 컨버터입니다. 이 디바이스는 일반적인 2.9A 피크 전류 제한과 1.6V ~ 5.5V의 입력 전압 범위를 가지고 있습니다. TPS631000은 시스템 프리 레귤레이터와 전압 안정기를 위한 전원 공급 장치 솔루션을 제공합니다.
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TPS631000 Encrypted PSPICE Model

SLVMDV2.ZIP (528 KB) - PSpice Model
패키지 다운로드
SOT-5X3 (DRL) 8 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상