TPS6522005-EP
- Supports defense, aerospace, and medical applications
- 3 buck converters at up to 2.3 MHz switching frequency.
- 1× VIN: 2.5 V – 5.5 V; I OUT: 3.5 A; V OUT 0.6 V – 3.4 V
- 2× VIN: 2.5 V – 5.5 V; I OUT: 2 A; V OUT 0.6 V – 3.4 V
- 4 linear regulators:
- 2x VIN: 1.5 V – 5.5 V; I OUT: 400 mA; V OUT: 0.6 V – 3.4 V (configurable as load switch and bypass-mode, supporting SD-card)
- 2x VIN: 2.2 V – 5.5 V; I OUT: 300 mA; V OUT: 1.2 V – 3.3 V (configurable as load switch)
- Dynamic voltage scaling on all three buck converters
- Low IQ/PFM, PWM-mode (quasi-fixed frequency) or fixed frequency mode
- Programmable power sequencing and default voltages
- I 2C interface, supporting standard, fast-mode and fast-mode+
- Designed to support systems with 14+ rails (2× TPS6522005-EP devices in multi-PMIC configuration)
- 2 GPOs, 1 GPIO, and 3 multi-function-pins
- EEPROM programmability
- Functional safety capable
- Controlled baseline
- One assembly/test site
- One fabrication site
- Extended product life cycle
- Extended product-change notification
- Product traceability
The TPS6522005-EP is a Power Management IC (PMIC) designed to supply a wide range of SoCs in both portable and stationary applications. The device is characterized across an ambient temperature range of -55°C to +125°C, making the PMIC an excellent choice for various industrial applications. The device includes three synchronous stepdown DC-DC converters and four linear regulators.
The DC-DC converters are capable of 1x 3.5 A and 2x 2 A. The converters require a small 470 nH inductor, 4.7 µF input capacitance, and a minimum 10 µF output capacitance per rail depending on the switching mode configuration.
Two of the LDOs support output currents of 400 mA at an output voltage range of 0.6 V to 3.4 V. These LDOs support bypass mode, acting as a load-switch, and allow voltage-changes during operation. The other two LDOs support output currents of 300 mA at an output voltage range of 1.2 V to 3.3 V. These LDOs also support load-switch mode.
The I2C-interface, IOs, GPIOs and multi-function-pins (MFP) allow a seamless interface to a wide range of SoCs.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TPS6522005-EPUser Programmable Power Management IC (PMIC) with Three Step-down DC/DC Converters and Four LDOs datasheet | PDF | HTML | 2023/11/10 |
* | Radiation & reliability report | TPS6522005-EP Enhanced Product Qualification and Reliability Report | PDF | HTML | 2023/11/29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
패키지 | 핀 | 다운로드 |
---|---|---|
VQFN (RHB) | 32 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.