홈 전원 관리 멀티 채널 IC(PMIC)
홈
전원 관리
멀티 채널 IC(PMIC)
신규

TPS65224-Q1

미리 보기

벅 컨버터 4개 및 LDO 3개가 포함된 5.5V PMIC(최대 ASIL-B ADAS 프로세서용)

지금 주문
데이터시트

TPS65224-Q1

미리 보기
데이터시트 지금 주문

제품 상세 정보

Regulated outputs (#) 7 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (max) (V) 3.3 Iout (max) (A) 10 Features Adaptive/Dynamic Voltage Scaling, Dynamic voltage scaling, I2C control, Integrated ADC, Multiple outputs, Power Sequencing, Power good, Undervoltage and overvoltage monitor TI functional safety category Functional Safety-Compliant LDO 3 Rating Automotive Operating temperature range (°C) -40 to 125 Processor name Sitara AM62A-Q1, Sitara AM62x-Q1 Switching frequency (typ) (kHz) 2200, 4400 Processor series Sitara AM62A-Q1, Sitara AM62x, Sitara AM62x-Q1, Sitara MPU
Regulated outputs (#) 7 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (max) (V) 3.3 Iout (max) (A) 10 Features Adaptive/Dynamic Voltage Scaling, Dynamic voltage scaling, I2C control, Integrated ADC, Multiple outputs, Power Sequencing, Power good, Undervoltage and overvoltage monitor TI functional safety category Functional Safety-Compliant LDO 3 Rating Automotive Operating temperature range (°C) -40 to 125 Processor name Sitara AM62A-Q1, Sitara AM62x-Q1 Switching frequency (typ) (kHz) 2200, 4400 Processor series Sitara AM62A-Q1, Sitara AM62x, Sitara AM62x-Q1, Sitara MPU
VQFN-HR (RAH) 36 30 mm² 6 x 5
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Input supply: 3 V to 5.5 V
    • Temperature grade 1: –40°C to +125°C (ambient)
    • HBM classification level 2
    • CDM classification level C4A
  • Functional safety-compliant targeted
    • Developed for functional safety applications
    • Documentation to aid ISO26262 system design available upon product release
    • Systematic integrity up to ASIL-D targeted
    • Hardware integrity up to ASIL-B targeted
    • Undervoltage and overvoltage monitors and current limit on all output supply rails
    • Undervoltage and overvoltage monitors for two external supply rails and for input supply
    • Watchdog (trigger or Q&A)
    • Error signal monitor (level or PWM)
    • Temperature warning and thermal shutdown
    • Built-in self-test on voltage monitors
  • BUCK1 + BUCK2 high-efficiency step-down DC/DC converters
    • Output voltage: 0.5 V to 3.3 V (0.5 V to 1.2 V for dual-phase output)
    • Output current: 5 A in single-phase, 10 A in dual-phase
    • Switching frequency: 2.2 MHz or 4.4 MHz
  • BUCK3 + BUCK4 high-efficiency step-down DC/DC converters
    • Output voltage: 0.5 V to 3.3 V
    • Output current: 2 A
    • Switching frequency: 2.2 MHz or 4.4 MHz
  • Two low-dropout (LDO) linear regulators with configurable load-switch mode
    • Output voltage: 0.6 V to 3.3 V in regulation mode, 1.7 V to 3.3 V in load-switch mode
    • Output current: 400 mA
  • One low-dropout (LDO) linear regulator with low-noise performance and with configurable load-switch mode
    • Output voltage: 1.2 V to 3.3 V in regulation mode, 2.2 V to 3.6 V in load-switch mode
    • Output current: 300 mA
  • Six configurable general-purpose input-output (GPIO) pins, reset and safe state outputs
  • One 12-bit ADC
  • OTP configurable power sequence
  • 36-pin, 5 mm × 6 mm, QFN package, 0.5-mm pitch
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Input supply: 3 V to 5.5 V
    • Temperature grade 1: –40°C to +125°C (ambient)
    • HBM classification level 2
    • CDM classification level C4A
  • Functional safety-compliant targeted
    • Developed for functional safety applications
    • Documentation to aid ISO26262 system design available upon product release
    • Systematic integrity up to ASIL-D targeted
    • Hardware integrity up to ASIL-B targeted
    • Undervoltage and overvoltage monitors and current limit on all output supply rails
    • Undervoltage and overvoltage monitors for two external supply rails and for input supply
    • Watchdog (trigger or Q&A)
    • Error signal monitor (level or PWM)
    • Temperature warning and thermal shutdown
    • Built-in self-test on voltage monitors
  • BUCK1 + BUCK2 high-efficiency step-down DC/DC converters
    • Output voltage: 0.5 V to 3.3 V (0.5 V to 1.2 V for dual-phase output)
    • Output current: 5 A in single-phase, 10 A in dual-phase
    • Switching frequency: 2.2 MHz or 4.4 MHz
  • BUCK3 + BUCK4 high-efficiency step-down DC/DC converters
    • Output voltage: 0.5 V to 3.3 V
    • Output current: 2 A
    • Switching frequency: 2.2 MHz or 4.4 MHz
  • Two low-dropout (LDO) linear regulators with configurable load-switch mode
    • Output voltage: 0.6 V to 3.3 V in regulation mode, 1.7 V to 3.3 V in load-switch mode
    • Output current: 400 mA
  • One low-dropout (LDO) linear regulator with low-noise performance and with configurable load-switch mode
    • Output voltage: 1.2 V to 3.3 V in regulation mode, 2.2 V to 3.6 V in load-switch mode
    • Output current: 300 mA
  • Six configurable general-purpose input-output (GPIO) pins, reset and safe state outputs
  • One 12-bit ADC
  • OTP configurable power sequence
  • 36-pin, 5 mm × 6 mm, QFN package, 0.5-mm pitch

The TPS65224-Q1 device meets the power management requirements of the latest processors and platforms in various safety-relevant applications. The device is characterized across an ambient temperature range of -40°C to +125°C, making the PMIC an excellent choice for various automotive applications. The device has four step-down DC/DC (BUCK) converters , of which two can be used in a dual-phase configuration. Furthermore, the device has three low drop-out (LDO) regulators, which can also be used as load-switches.

The TPS65224-Q1 device meets the power management requirements of the latest processors and platforms in various safety-relevant applications. The device is characterized across an ambient temperature range of -40°C to +125°C, making the PMIC an excellent choice for various automotive applications. The device has four step-down DC/DC (BUCK) converters , of which two can be used in a dual-phase configuration. Furthermore, the device has three low drop-out (LDO) regulators, which can also be used as load-switches.

open-in-new 기타 멀티 채널 IC(PMIC) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상
추가 정보 요청

전체 데이터 시트 및 기타 정보를 사용할 수 있습니다. 지금 요청

기능 안전 설명서를 사용할 수 있습니다. 지금 요청하기

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기3
유형 직함 날짜
* Data sheet TPS65224-Q1Power Management IC (PMIC) with 4 BUCKs and 3 LDOs for Safety-Relevant Automotive Applications datasheet PDF | HTML 2023/12/07
Product overview PMIC for Powering AM62Px Devices PDF | HTML 2024/03/14
Certificate TPS65224Q1EVM EU Declaration of Conformity (DoC) 2023/10/30

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS65224Q1EVM — TPS652241-Q1 평가 모듈

TPS65224Q1EVM 보드는 차량 및 산업 용도로 TPS6522x 전원 관리 IC를 테스트, 시연, 디버깅 및 구성에 사용할 수 있습니다. 온보드 장치는 10A 출력 1개와 2A 출력 2개를 갖춘 벅 컨버터용 2+1+1 위상 구성을 갖춘 TPs6522430-Q1입니다.
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없습니다
패키지 핀 다운로드
VQFN-HR (RAH) 36 옵션 보기
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상