홈 전원 관리 DDR 메모리 전원 IC
홈
전원 관리
DDR 메모리 전원 IC

TPS65295

활성

4.5V~18V VIN 완전한 DDR4 메모리 전원 솔루션

지금 주문
데이터시트

TPS65295

활성
데이터시트 지금 주문

제품 상세 정보

DDR memory type DDR4 Control mode D-CAP3 Iout VDDQ (max) (A) 8 Iout VTT (max) (A) 1 Iq (typ) (mA) 0.15 Output VDDQ, VREF, VTT Vin (min) (V) 4.5 Vin (max) (V) 18 Features Complete Solution Rating Catalog Operating temperature range (°C) -40 to 125 Regulator type Step-Down Converter Vin bias (max) (V) 16 Vin bias (min) (V) 4.5 Vout VTT (min) (V) 0.6
DDR memory type DDR4 Control mode D-CAP3 Iout VDDQ (max) (A) 8 Iout VTT (max) (A) 1 Iq (typ) (mA) 0.15 Output VDDQ, VREF, VTT Vin (min) (V) 4.5 Vin (max) (V) 18 Features Complete Solution Rating Catalog Operating temperature range (°C) -40 to 125 Regulator type Step-Down Converter Vin bias (max) (V) 16 Vin bias (min) (V) 4.5 Vout VTT (min) (V) 0.6
VQFN-HR (RJE) 18 9 mm² 3 x 3
  • Synchronous buck converter (VDDQ)
    • Input voltage range: 4.5 V to 18 V
    • Output voltage fixed at 1.2 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 8 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 22-mΩ and 8.6-mΩ RDS(on) internal power switch
    • 600-kHz switching frequency
    • Internal soft start: 1.6 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV and UV protections
  • Synchronous buck converter (VPP)
    • Input voltage range: 3 V to 5.5 V
    • Output voltage fixed at 2.5 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 1 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 150-mΩ and 120-mΩ RDS(on) internal power switch
    • 580-kHz switching frequency
    • Internal soft start: 1 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV and UV protections
  • 1-A LDO (VTT)
    • 1-A continual sink and source current
    • Requires only 10 µF of ceramic output capacitor
    • Support high-z in S3
    • ±30-mV VTT output accuracy (DC+AC)
  • Buffered reference (VTTREF)
    • Buffered, low noise, ±10-mA capability
    • 0.8% output accuracy
  • Low quiescent current: 150 µA
  • Power good indicator
  • Output discharge function
  • Power up and power down sequencing control
  • Non-latch for OT and UVLO protections
  • 18-pin 3.0-mm × 3.0-mm HotRod™ VQFN package
  • Synchronous buck converter (VDDQ)
    • Input voltage range: 4.5 V to 18 V
    • Output voltage fixed at 1.2 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 8 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 22-mΩ and 8.6-mΩ RDS(on) internal power switch
    • 600-kHz switching frequency
    • Internal soft start: 1.6 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV and UV protections
  • Synchronous buck converter (VPP)
    • Input voltage range: 3 V to 5.5 V
    • Output voltage fixed at 2.5 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 1 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 150-mΩ and 120-mΩ RDS(on) internal power switch
    • 580-kHz switching frequency
    • Internal soft start: 1 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV and UV protections
  • 1-A LDO (VTT)
    • 1-A continual sink and source current
    • Requires only 10 µF of ceramic output capacitor
    • Support high-z in S3
    • ±30-mV VTT output accuracy (DC+AC)
  • Buffered reference (VTTREF)
    • Buffered, low noise, ±10-mA capability
    • 0.8% output accuracy
  • Low quiescent current: 150 µA
  • Power good indicator
  • Output discharge function
  • Power up and power down sequencing control
  • Non-latch for OT and UVLO protections
  • 18-pin 3.0-mm × 3.0-mm HotRod™ VQFN package

The TPS65295 device provides a complete power solution for DDR4 memory system with the lowest total cost and minimum space. It meets the JEDEC standard for DDR4 power-up and power-down sequence requirement. The TPS65295 integrates two synchronous buck converters (VPP and VDDQ) and a 1-A sink and source tracking LDO (VTT) and a buffered low noise reference (VTTREF). The TPS65295 employs D-CAP3™ mode coupled with 600-kHz switching frequency for ease-of-use, fast transient, and support for ceramic output capacitors without an external compensation circuit.

The VTTREF tracks ½ VDDQ within excellent 0.8% accuracy. The VTT, which provides both 1-A sink and source continual current capabilities, requires only 10-µF of ceramic output capacitor.

The TPS65295 provides rich functions as well as excellent power supply performance. It supports flexible power state control, placing VTT at high-Z in S3 and discharging VDDQ, VTT, and VTTREF in S4/S5 state. OVP, UVP, OCP, UVLO and thermal shutdown protections are also available. The part is available in a thermally enhanced 18-pin HotRod™ VQFN package and is designed to operate under the –40°C to 125°C junction temperature range.

The TPS65295 device provides a complete power solution for DDR4 memory system with the lowest total cost and minimum space. It meets the JEDEC standard for DDR4 power-up and power-down sequence requirement. The TPS65295 integrates two synchronous buck converters (VPP and VDDQ) and a 1-A sink and source tracking LDO (VTT) and a buffered low noise reference (VTTREF). The TPS65295 employs D-CAP3™ mode coupled with 600-kHz switching frequency for ease-of-use, fast transient, and support for ceramic output capacitors without an external compensation circuit.

The VTTREF tracks ½ VDDQ within excellent 0.8% accuracy. The VTT, which provides both 1-A sink and source continual current capabilities, requires only 10-µF of ceramic output capacitor.

The TPS65295 provides rich functions as well as excellent power supply performance. It supports flexible power state control, placing VTT at high-Z in S3 and discharging VDDQ, VTT, and VTTREF in S4/S5 state. OVP, UVP, OCP, UVLO and thermal shutdown protections are also available. The part is available in a thermally enhanced 18-pin HotRod™ VQFN package and is designed to operate under the –40°C to 125°C junction temperature range.
open-in-new 기타 DDR 메모리 전원 IC 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기3
유형 직함 날짜
* Data sheet TPS65295 complete DDR4 memory power solution datasheet PDF | HTML 2019/02/22
Application note Non-Isolated Point-of-Load Solutions for Tiger Lake in PC Applications (Rev. B) PDF | HTML 2021/04/29
EVM User's guide TPS65295EVM-079 user's guide 2018/12/04

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS65295EVM-079 — 8A 동기 벅 컨버터 평가 모듈

The TPS65295 evaluation module (EMV) is used to evaluate the TPS65295 device. The TPS65295 device provides a complete power solution for DDR4 memory system with the lowest total cost and minimum space. It meets the JEDEC standard for DDR4 power-up and power-down sequence requirement. The (...)
사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TPS65295 PSpice Transient Model

SLUM678.ZIP (114 KB) - PSpice Model
다운로드
패키지 핀 다운로드
VQFN-HR (RJE) 18 옵션 보기
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상