TPSM861253
- Configured for a wide range of applications
- 3V to 17V wide input voltage range
- Fixed 3.3V output for TPSM861253
- 0.6V to 10V output range for TPSM861252
- 0.6V to 5.5V output range for TPSM861257
- 0.6V reference voltage
- ±1% for 0.6Vref accuracy at 25°C
- ±1.5% for 0.6Vref accuracy at –40°C to 125°C
- ±1% for 3.3Vout accuracy from 0 to 65°C
- Integrated 55mΩ and 24mΩ MOSFETs
- 100µA low quiescent current for TPSM861252
- 1.4MHz switching frequency
- Maximum 95% large duty cycle operation
- 1.2V precision EN threshold voltage
- 1.6ms fixed typical soft-start time
- Ease of use and small design size
- TPSM861252 Eco-mode, TPSM861253/7 FCCM mode at light load
- Fast transient D-CAP3™ control mode
- Easy layout with integrated inductor and bootstrap capacitor
- Support start-up with prebiased output voltage
- Open-drain power-good indicator
- Non-latch for OV, OT, and UVLO protection
- Hiccup mode in UV protection
- Cycle-by-cycle OC and NOC protection
- –40°C to 125°C operating junction temperature
- 3.3mm × 4mm × 2mm QFN package
- Create a custom design using the TPSM86125x with the WEBENCH® Power Designer
The TPSM86125x is a simple, easy-to-use, high-efficiency, high-power density, synchronous buck module with input voltage ranging from 3V to 17V and supports up to 1A continuous current.
The TPSM86125x employs D-CAP3 control mode to provide a fast transient response and to support low-ESR output capacitors with no requirement for external compensation. The device can support up to 95% duty cycle operation.
The TPSM861252 operates in Eco-mode, which maintains high efficiency during light load. The TPSM861257 operates in FCCM mode, which keeps the same frequency and lower output ripple during all load conditions. TPSM861253 is a fixed 3.3V output voltage part with FCCM mode. The device also integrates the divider resistors and a feedforward capacitor inside the module. The TPSM86125x integrates complete protection including OVP, OCP, UVLO, OTP, and UVP with hiccup.
The device is available in QFN package. The junction temperature is specified from –40°C to 125°C.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPSM86125x 3V to 17V Input, 1A, Synchronous Buck Module in QFN Package datasheet (Rev. B) | PDF | HTML | 2024/03/22 |
| EVM User's guide | TPSM86125xEVM Step-Down Converter Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2024/02/21 | |
| Certificate | TPSM861253EVM EU Declaration of Conformity (DoC) | 2023/09/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPSM861253EVM — TPSM861253 1-A 동기식 강압 벅 평가 모듈
TPSM861253 평가 모듈(EVM)은 간단하고 사용이 편리한 1A 동기식 강압 벅 모듈입니다. TPSM861253EVM은 TPSM861253 강압 벅 모듈 평가 용도로 완조립 및 테스트를 거친 회로입니다. TPSM861253EVM은 3V~17V 입력(정격 12V)에서 작동하며, 1A에서 3.3V 출력을 제공합니다. 또한 이 EVM에는 피드백 루프 측정을 위한 AC 신호 주입 터미널도 포함되어 있습니다.
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| QFN-FCMOD (RDX) | 7 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치