UCC1806-SP
- BiCMOS Version of UC3846 Families
- 1.4-mA Maximum Operating Current
- 100-µA Maximum Startup Current
- ±0.5-A Peak Output Current
- 125-ns Circuit Delay
- Easier Parallelability
- Improved Benefits of Current Mode Control
The UCC3806 family of BiCMOS PWM controllers offers exceptionally improved performance with a familiar architecture. With the same block diagram and pinout of the popular UC3846 series, the UCC3806 line features increased switching frequency capability while greatly reducing the bias current used within the device. With a typical startup current of 50µA and a well defined voltage threshold for turn-on, these devices are favored for applications ranging from off-line power supplies to battery operated portable equipment. Dual high current, MOSFET driving outputs and a fast current sense loop further enhance device versatility.
All the benefits of current mode control including simpler loop closing, voltage feed-forward, parallelability with current sharing, pulse-by-pulse current limiting, and push-pull symmetry correction are readily achievable with the UCC3806 series.
These devices are available with multiple package options for both through-hole and surface mount applications; and in commercial, industrial, and military temperature ranges.
The UCC3806 is specified for operation from –55°C to +125°C, the UCC2806 is specified for operation from –40°C to +85°C, and the UCC3806 is specified for operation from 0°C to +70°C.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | Low Power Dual Output Current Mode PWM Controller datasheet (Rev. F) | 2006/08/24 | |
| * | SMD | UCC1806-SP SMD 5962-94575 | 2016/07/08 | |
| More literature | TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) | 2023/08/31 | ||
| Application note | QML flow, its importance, and obtaining lot information (Rev. C) | 2023/08/30 | ||
| Application note | Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) | PDF | HTML | 2022/11/17 | |
| Application note | Single-Event Effects Confidence Interval Calculations (Rev. A) | PDF | HTML | 2022/10/19 | |
| Selection guide | TI Space Products (Rev. I) | 2022/03/03 | ||
| Application note | DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer | 2020/08/21 | ||
| Application note | Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form | PDF | HTML | 2020/05/18 | |
| E-book | Radiation Handbook for Electronics (Rev. A) | 2019/05/21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치