SN65LVDS180 Single Full-Duplex LVDS Transceiver | TI.com

SN65LVDS180 (ACTIVE)

Single Full-Duplex LVDS Transceiver

Single Full-Duplex LVDS Transceiver - SN65LVDS180
 

Description

The SN65LVDS179, SN65LVDS180, SN65LVDS050, and SN65LVDS051 devices are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The TIA/EIA-644 standard-compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.

These devices offer various driver, receiver, and enabling combinations in industry-standard footprints. Because these devices are intended for use in simplex or distributed simplex bus structures, the driver enable function does not put the differential outputs into a high-impedance state but rather disconnects the input and reduces the quiescent power used by the device. For these functions with a high-impedance driver output, see the SN65LVDM series of devices. All devices are characterized for operation from –40°C to 85°C.

Features

  • Meets or Exceeds the Requirements of ANSI
    TIA/EIA-644-1995 Standard
  • Full-Duplex Signaling Rates up to 150 Mbps
  • Bus-Pin ESD Exceeds 12 kV
  • Operates From a Single 3.3-V Supply
  • Low-Voltage Differential Signaling With Typical
    Output Voltages of 350 mV and a 100-Ω Load
  • Propagation Delay Times
    • Driver: 1.7 ns Typical
    • Receiver: 3.7 ns Typical
  • Power Dissipation at 200 MHz
    • Driver: 25 mW Typical
    • Receiver: 60 mW Typical
  • LVTTL Input Levels Are 5-V Tolerant
  • Receiver Maintains High Input Impedance With
    VCC < 1.5 V
  • Receiver Has Open-Circuit Fail Safe

View more

Parametrics Compare all products in Buffers, Drivers/Receivers and Cross-Points

 
Device Type
Protocols
No. of Tx
No. of Rx
Input Signal
Output Signal
Signaling Rate (Mbps)
ESD HBM (kV)
Function
Operating Temperature Range (C)
Package Group
Package Size: mm2:W x L (PKG)
Pin/Package
SN65LVDS180 DS90LV012A SN65LVDM179 SN65LVDM180 SN65LVDS1 SN65LVDS179 SN65LVDS2 SN65LVDS4
Transceiver     Receiver     Transceiver     Transceiver     Driver     Transceiver     Receiver     Receiver    
LVDS     M-LVDS     M-LVDS     M-LVDS     LVDS     LVDS     LVDS     LVDS    
1     0     1     1     1     1     0     0    
1     1     1     1     0     1     1     1    
LVDS
LVTTL    
LVDS
BLVDS
LVPECL    
LVDM
LVTTL
LVDS    
LVDM
LVTTL
LVDS    
LVTTL     LVDS
LVTTL    
LVDS     LVDS    
LVDS
LVTTL    
CMOS     LVDM
LVTTL
LVDS    
LVDM
LVTTL
LVDS    
LVDS     LVDS
LVTTL    
LVTTL     LVTTL
LVCMOS    
400
150    
400     500TX/150RX     500TX/150RX     630     400
150    
400     500    
12     2     12     12     9     12     9     2    
Transceiver     Receiver     Transceiver     Transceiver     Driver     Transceiver     Receiver     Receiver    
-40 to 85     -40 to 85     -40 to 85     -40 to 85     -40 to 85     -40 to 85     -40 to 85     -40 to 85    
SOIC
TSSOP    
SOT-23     SOIC
VSSOP    
SOIC
TSSOP    
SOIC
SOT-23    
SOIC
VSSOP    
SOIC
SOT-23    
UQFN    
14SOIC: 52 mm2: 6 x 8.65(SOIC)
14TSSOP: 32 mm2: 6.4 x 5(TSSOP)    
5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)     8SOIC: 29 mm2: 6 x 4.9(SOIC)
8VSSOP: 15 mm2: 4.9 x 3(VSSOP)    
14SOIC: 52 mm2: 6 x 8.65(SOIC)
14TSSOP: 32 mm2: 6.4 x 5(TSSOP)    
8SOIC: 29 mm2: 6 x 4.9(SOIC)
5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)    
8SOIC: 29 mm2: 6 x 4.9(SOIC)
8VSSOP: 15 mm2: 4.9 x 3(VSSOP)    
8SOIC: 29 mm2: 6 x 4.9(SOIC)
5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23)    
10UQFN: 3 mm2: 2 x 1.5(UQFN)    
14SOIC
14TSSOP    
5SOT-23     8SOIC
8VSSOP    
14SOIC
14TSSOP    
5SOT-23
8SOIC    
8SOIC
8VSSOP    
5SOT-23
8SOIC    
10UQFN    

Other qualified versions of SN65LVDS180

Version Part Number Definition
Automotive SN65LVDS180-Q1 Q100 devices qualified for high-reliability automotive applications targeting zero defects

Featured tools and software