Refer to the PDF data sheet for device specific package drawings
The CC3220MODx and CC3220MODAx microcontroller includes one SPI module, which can be configured as a master or slave device. The SPI includes a serial clock with programmable frequency, polarity, and phase; a programmable timing control between chip select and external clock generation; and a programmable delay before the first SPI word is transmitted. Slave mode does not include a dead cycle between two successive words.
Figure 8-8 shows the timing diagram for the SPI master.
Table 8-4 lists the timing parameters for the SPI master.
|T6||tIS(1)||RX data setup time||1||ns|
|T7||tIH(1)||RX data hold time||2||ns|
|T8||tOD(1)||TX data output delay||8.5||ns|
|T9||tOH(1)||TX data hold time||8||ns|