SNLS638A December 2018 – August 2019 DP83825I
CDCR_Register is shown in Table 42.
Return to Summary Table.
Cable Diagnostic Process Start: Diagnostic Start bit is cleared once Diagnostic Done indication bit is triggered.
0x0 = Cable Diagnostic is disabled
0x1 = Start cable measurement
Resistor calibration Start
Cable Diagnostic Process Done:
0x0 = Cable Diagnostic had not completed
0x1 = Indication that cable measurement process is complete
Cable Diagnostic Process Fail:
0x0 = Cable Diagnostic has not failed
0x1 = Indication that cable measurement process failed