SLVSGV9 august   2023 DRV8213

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Revision History
  6. 5 Device Comparison
  7. 6 Pin Configuration and Functions
  8. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Diagrams
    7. 7.7 Typical Operating Characteristics
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 External Components
    4. 8.4 Feature Description
      1. 8.4.1 Bridge Control
      2. 8.4.2 Current Sense and Regulation (IPROPI)
        1. 8.4.2.1 Current Sensing and Current Mirror Gain Selection
        2. 8.4.2.2 Current Regulation
      3. 8.4.3 Hardware Stall Detection
      4. 8.4.4 Protection Circuits
        1. 8.4.4.1 Overcurrent Protection (OCP)
        2. 8.4.4.2 Thermal Shutdown (TSD)
        3. 8.4.4.3 VM Undervoltage Lockout (UVLO)
    5. 8.5 Device Functional Modes
      1. 8.5.1 Active Mode
      2. 8.5.2 Low-Power Sleep Mode
      3. 8.5.3 Fault Mode
    6. 8.6 Pin Diagrams
      1. 8.6.1 Logic-Level Inputs
      2. 8.6.2 Tri-Level Input
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Brushed DC Motor
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
          1. 9.2.1.2.1 Motor Voltage
          2. 9.2.1.2.2 Motor Current
        3. 9.2.1.3 Stall Detection
          1. 9.2.1.3.1 Detailed Design Procedure
            1. 9.2.1.3.1.1 Hardware Stall Detection Application Description
              1. 9.2.1.3.1.1.1 Hardware Stall Detection Timing
              2. 9.2.1.3.1.1.2 Hardware Stall Threshold Selection
            2. 9.2.1.3.1.2 Software Stall Detection Application Description
              1. 9.2.1.3.1.2.1 Software Stall Detection Timing
              2. 9.2.1.3.1.2.2 Software Stall Threshold Selection
        4. 9.2.1.4 Application Curves
        5. 9.2.1.5 Thermal Performance
          1. 9.2.1.5.1 Steady-State Thermal Performance
          2. 9.2.1.5.2 Transient Thermal Performance
  11. 10Power Supply Recommendations
    1. 10.1 Bulk Capacitance
  12. 11Layout
    1. 11.1 Layout Guidelines
  13. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Community Resources
    4. 12.4 Trademarks
  14. 13Mechanical, Packaging, and Orderable Information
    1. 13.1 Tape and Reel Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.4.4.3 VM Undervoltage Lockout (UVLO)

Whenever the supply voltage falls below the UVLO falling threshold voltage, VUVLO, all circuitry in the device is disabled, the output FETS are disabled, all internal logic is reset and nFAULT is pulled low. When powered by split supplies (RTE package only), the UVLO triggers when the VCC pin voltage drops below VUVLO_VCC falling threshold. This allows the VM supply to dip all the way to 0 V. When operating from a single supply (DSG package only), the UVLO triggers when the VM pin voltage drops below VUVLO_VM falling threshold. Normal operation resumes when the supply voltage rises above the VUVLO rising threshold as shown in Figure 8-12. Table 8-7 summarizes the conditions when the device enters UVLO.

GUID-20220422-SS0I-B9KX-KF0F-S0KLQPM7GKK9-low.svgFigure 8-12 UVLO Operation
Table 8-7 UVLO response conditions
Package variantVVMVVCCDevice Response

IPROPI

RTE0 V to VVM_MAX<1.65 VUVLO

Not available

0 V to VVM_MAX>1.65 VNormal Operation

Available for VVM > 1.65 V

DSG<1.65 VN/AUVLO

Not available

1.65 V to VVM_MAXN/ANormal Operation

Available