SBAS804G September   2017  – April 2026 REF34

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  8. 7 Parameter Measurement Information
    1. 7.1 Solder Heat Shift
    2. 7.2 Long-Term Stability
    3. 7.3 Thermal Hysteresis
    4. 7.4 Power Dissipation
    5. 7.5 Noise Performance
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Supply Voltage
      2. 8.3.2 Low Temperature Drift
      3. 8.3.3 Load Current
    4. 8.4 Device Functional Modes
      1. 8.4.1 EN Pin
      2. 8.4.2 Negative Reference Voltage
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application: Basic Voltage Reference Connection
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Input and Output Capacitors
        2. 9.2.2.2 4-Wire Kelvin Connections
        3. 9.2.2.3 VIN Slew Rate Considerations
        4. 9.2.2.4 Shutdown/Enable Feature
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Electrical Characteristics

At VIN = VOUT + VDO, COUT = 10µF, CIN = 0.1µF, IL = 0mA, minimum and maximum specifications at TA = –40℃ to 125℃; Typical specifications at TA = 25℃ unless otherwise noted
PARAMETERTEST CONDITIONMINTYPMAXUNIT
ACCURACY AND DRIFT
Output voltage accuracyTA = 25℃–0.050.05%
Output voltage temperature coefficient (1) –40°C ≤ TA ≤ 125°C2.56ppm/°C
LINE AND LOAD REGULATION
ΔVO/ΔVINLine RegulationVIN = VOUT + VDO (2) to 12V215ppm/V
ΔVO/ΔILLoad RegulationIL = 0mA to 10mA, VIN = VOUT+ VDO (3)Sourcing2030ppm/mA
IL = 0mA to –10mA, VIN = VOUT+ VDO,  TA = 25°C (3)Sinking, REF34254070
Sinking, REF34304375
Sinking, REF34334884
Sinking, REF34406098
Sinking, REF345070140
ISCShort circuit currentVOUT = 0V at TA = 25°C1822mA
NOISE
enp-pLow frequency noise (4)0.1Hz ≤ f ≤ 10Hz5µVp-p/V
0.1Hz ≤ f ≤ 10Hz (REF3440 and REF3450)3.8
enIntegrated wide band noise10Hz ≤ f ≤ 10kHz24µVrms
enOutput voltage noise densityf = 1kHz0.25ppm/√Hz
 
f = 1kHz (REF3440 and REF3450)0.2
LONG TERM STABILITY AND HYSTERESIS
Long-term stability (5)DBV Package0 to 1000h at 35°C25ppm
1000h to 2000h at 35°C 10
Output voltage thermal hysteresis (6)DBV Package25°C, –40°C,125°C, 25°C Cycle 130ppm
25°C, –40°C,125°C, 25°C Cycle 210
TURN-ON TIME
tONTurn-on time0.1% of output voltage settling, CL = 10µF2.5ms
CAPACITIVE LOAD
CLStable output capacitor range –40°C ≤ TA ≤ 125°C0.110µF
OUTPUT VOLTAGE
VOUTOutput voltageREF3425, REF3425T2.5V
REF3430, REF3430T3.0
REF3433, REF3433T3.3
REF3440, REF3440T4.096
REF3450, REF3450T5.0
POWER SUPPLY
VINInput voltageVOUT + VDO12V
ILOutput current capacityVIN = VOUT + VDO to 12V–1010mA
IQQuiescent currentActive mode7295µA
Shutdown mode2.53
VENENABLE pin voltageVoltage reference in active mode (EN = 1)1.6V
Voltage reference in shutdown mode (EN = 0)0.5
VDODropout voltageIL = 0mA50100mV
IL = 10mA500
IENENABLE pin leakage currentVEN = VIN = 12V12µA
Temperature drift is specified according to the box method. See Section 8.3.2 for more details.
VDO for line regulation test is 50mV.
VDO for load regulation test is 500mV.
The peak-to-peak noise measurement is explained in more detail in Section 7.5.
Long-term stability measurement procedure is explained in more detail in Section 7.2.
Thermal hysteresis measurement procedure is explained in more detail in Section 7.3.