1 Features

AEC-Q100 (Grade 1): Qualified for automotive applications
Two independent high-speed CAN FD transceivers with mode control
Meets the requirements of ISO 11898-2:2016 physical layer standard
Functional Safety-Capable
- Documentation available to aid in functional safety system design
Support of classical CAN and optimized CAN FD performance at 2, 5, and 8 Mbps
- Short and symmetrical propagation delays for enhanced timing margin
Support for 12-V and 24-V battery applications
Receiver common-mode input voltage: ±12 V
Protection features:
- Bus fault protection: ±58 V
- Undervoltage protection
- TXD-dominant time-out (DTO)
  - Data rates down to 9.2 kbps
- Thermal-shutdown protection (TSD)
Operating modes:
- Normal mode
- Low power standby mode supporting remote wake-up request
Optimized behavior when unpowered
- Bus and logic pins are high impedance (no load to operating bus or application)
- Hot-plug capable: power-up and power-down glitch-free operation on bus and RXD output
Junction temperatures from: –40°C to 150°C
Available in SOIC (14) and leadless VSON (14) packages (4.5 mm x 3.0 mm) with improved automated optical inspection (AOI) capability