SGLS007G Data sheet

SGLS007G February 2003 – August 2022 TLC2272-Q1 , TLC2272A-Q1 , TLC2274-Q1 , TLC2274A-Q1

PRODUCTION DATA

Package Options

Mechanical Data (Package|Pins)

D|8
- MSOI002K
PW|8
- MPDS568

Thermal pad, mechanical data (Package|Pins)

D|8
- QFND304D
PW|8
- QFND305D

Orderable Information

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

		MIN	MAX	UNIT
Supply voltage, V_DD+⁽²⁾			8	V
V_DD–⁽²⁾		–8		V
Differential input voltage, V_ID⁽³⁾			±16	V
Input voltage, V_I(any input)⁽²⁾		V_DD− − 0.3	V_DD+	V
Input current, I_I (any input)			±5	mA
Output current, I_O			±50	mA
Total current into V_DD+			±50	mA
Total current out of V_DD–			±50	mA
Duration of short-circuit current at (or below) 25°C⁽⁴⁾		Unlimited
Operating free-air temperature range, T_A		–40	125	°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds	D or PW package		260	°C
Storage temperature, T_stg		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Section 6.3. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values, except differential voltages, are with respect to the midpoint between V_DD+ and V_DD−.

(3) Differential voltages are at IN+ with respect to IN–. Excessive current will flow if input is brought below V_DD– − 0.3 V.

(4) The output can be shorted to either supply. Temperature or supply voltages must be limited so that the maximum dissipation rating is not exceeded.