DLPU103B october   2020  – may 2023 DLP230NP

 

  1.   1
  2.   DLP LightCrafter Display 230NP EVM
  3.   Trademarks
  4. 1  DLP LightCrafter Display 230NP EVM Overview
  5. 2 Safety Instructions
  6. 3 Applicable Documents
  7. 4 What is in the DLP LightCrafter Display 230NP EVM?
  8. 5 Light Engine
  9. 6 Quick-Start Procedure
  10. 7 Connectors on Formatter Board
  11. 8 EVM Setup
  12. 9 Raspberry Pi Guide
    1. 9.1 Raspberry Pi General Configuration
    2. 9.2 Video Timing Configuration
    3. 9.3 Python Support Software
    4. 9.4 Operating Modes
    5. 9.5 Example Applications
      1. 9.5.1 Initialize Communication Between Raspberry Pi and EVM
      2. 9.5.2 Play Video Content from Raspberry Pi
      3. 9.5.3 Execute Sample Scripts Using Raspberry Pi
      4. 9.5.4 Rewrite Controller or FPGA Flash Device Using Raspberry Pi
  13. 10Troubleshooting
  14. 11Support Resources
  15. 12Revision History

4 What is in the DLPLightCrafter Display 230NP EVM?

The DLP LightCrafter Display module consists of two subsystems:

  • Light engine – includes the optics, red, green, and blue LEDs, and a 960 × 540 DMD which displays 1920 × 1080 pixels on the screen.
  • Driver board – includes the DLP chipset comprised of the DLPC3436 Controller and DLPA2005 PMIC/LED driver.

  • The DLP Light Crafter Display 230NP EVM is designed for a max. ambient temperature of 35°C.

GUID-9F38918F-1293-487E-9746-614BFA2AC05B-low.jpgFigure 4-1 DLP®LightCrafter™ Display EVM Block Diagram