SBAU456 September   2024 ADS9212

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 ADS9212EVM Quick Start Guide
    2. 2.2 Power Supplies
      1. 2.2.1 USB Power and When to Power the Board Externally
    3. 2.3 Analog Interface
      1. 2.3.1 ADC Input SMA Connections
      2. 2.3.2 Voltage Reference
    4. 2.4 Digital Interface Connections
    5. 2.5 Digital Interface and Clock Inputs
  7. 3Software
    1. 3.1 ADS9212EVM-GUI Software Installation
    2. 3.2 USB Driver Installation
    3. 3.3 Using the CONFIG Tab
    4. 3.4 Using the Capture Tab
    5. 3.5 Using the INL/DNL Tool
    6. 3.6 Using the Histogram Tab
  8. 4Hardware Design Files
    1. 4.1 Schematics
      1. 4.1.1 ADS9212EVM Schematics
    2. 4.2 Layout
    3. 4.3 Bill of Materials (BOM)
  9. 5Additional Information
    1. 5.1 Trademarks
  10. 6Related Documentation

4.1.1 ADS9212EVM Schematics

The schematics below show the various connections to the ADS9212 device. The digital signals connect to J19, as shown in Figure 4-3. The analog signals connect to SMA connectors and input filtering. The decoupling for the device is shown in Figure 4-1.

ADS9212EVM ADS9212 Device Connections SchematicFigure 4-1 ADS9212 Device Connections Schematic
ADS9212EVM Power Connections and Regulators SchematicFigure 4-2 Power Connections and Regulators Schematic
ADS9212EVM Digital Connector SchematicFigure 4-3 Digital Connector Schematic