SLOU558B August   2022  – January 2023 DRV8452 , DRV8462 , DRV8962

 

  1.   Abstract
  2.   Trademarks
  3. 1 Introduction
    1. 1.1 Overview
    2. 1.2 Purpose and Scope
  4. 2 Jumpers Table and Setup
  5. 3 Software Setup
    1. 3.1 Cloud-based GUI
    2. 3.2 Local Installation
  6. 4 Hardware Setup
  7. 5 Launching the DRV84xx_DRV82x2_DRV89x2-EVM GUI Application
  8. 6 GUI Operations DRV8461EVM, DRV8462EVM, and DRV8462VEVM
  9. 7 GUI Operations DRV8962EVM and DRV8962VEVM
  10. 8 GUI Operations DRV8262EVM and DRV8262VEVM
    1. 8.1 DRV8262 Dual H-Bridges
    2. 8.2 DRV8262 Parallel Single H-Bridge
  11. 9 Updating Firmware
  12. 10Evaluation Hardware Overview
  13.   A Appendix A

1.2 Purpose and Scope

This document is designed to be used as a start-up guide and to supplement the DRV84xx, DRV89x2, and DRV82x2 EVM. The scope of this document is to provide the user with a guide to evaluate the DRV84xx, DRV89x2, and DRV82x2 family of devices using a Graphical User Interface (GUI). The GUI application is required to control the EVM. This document covers the required EVM connections, configuration, and steps to use the GUI application for evaluation.