SLUSEE5E January   2022  – April 2026 TPS4811-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 Recommended Operating Conditions
    3. 6.3 ESD Ratings
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Switching Characteristics
    7. 6.7 Typical Characteristics
  8. 7 Parameter Measurement Information
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Charge Pump and Gate Driver output (VS, PU, PD, BST, SRC)
      2. 8.3.2 Capacitive Load Driving
        1. 8.3.2.1 FET Gate Slew Rate Control
        2. 8.3.2.2 Using Precharge FET - (with TPS48111Q1 Only)
      3. 8.3.3 Overcurrent and Short-Circuit Protection
        1. 8.3.3.1 Overcurrent Protection With Auto-Retry
        2. 8.3.3.2 Overcurrent Protection With Latch-Off
        3. 8.3.3.3 Short-Circuit Protection
      4. 8.3.4 Analog Current Monitor Output (IMON)
      5. 8.3.5 Overvoltage (OV) and Undervoltage Protection (UVLO)
      6. 8.3.6 Remote Temperature sensing and Protection (DIODE)
      7. 8.3.7 Output Reverse Polarity Protection
      8. 8.3.8 TPS4811x-Q1 as a Simple Gate Driver
    4. 8.4 Device Functional Mode (Shutdown Mode)
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application: Driving HVAC PTC Heater Load on KL40 Line in Power Distribution Unit
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Selection of Current Sense Resistor, RSNS
        2. 9.2.2.2 Selection of Scaling Resistor, RSET
        3. 9.2.2.3 Programming the Overcurrent Protection Threshold - RIWRN Selection
        4. 9.2.2.4 Programming the Short-Circuit Protection Threshold - RISCP Selection
        5. 9.2.2.5 Programming the Fault Timer Period - CTMR Selection
        6. 9.2.2.6 Selection of MOSFET, Q1
        7. 9.2.2.7 Selection of Bootstrap Capacitor, CBST
        8. 9.2.2.8 Setting the Undervoltage Lockout and Overvoltage Set Point
        9. 9.2.2.9 Choosing the Current Monitoring Resistor, RIMON
      3. 9.2.3 Application Curves
    3. 9.3 Typical Application: Driving B2B FETs With Pre-Charging the Output Capacitance
      1. 9.3.1 Design Requirements
      2. 9.3.2 External Component Selection
        1. 9.3.2.1 Selection of Pre-Charge Resistor
      3. 9.3.3 Application Curves
    4. 9.4 Typical Application: Designing for EMI
      1. 9.4.1 Common EMI Components
      2. 9.4.2 Programming the Overcurrent Protection Threshold with Added DC Resistance - RIWRN
      3. 9.4.3 Choosing the Current Monitoring Resistor with Added DC Resistance - RIMON
      4. 9.4.4 Programming the Short Circuit Protection Threshold with Added DC Resistance - RISCP
    5. 9.5 Power Supply and EMI Recommendations
    6. 9.6 Layout
      1. 9.6.1 Layout Guidelines
      2. 9.6.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Receiving Notification of Documentation Updates
    2. 10.2 Support Resources
    3. 10.3 Trademarks
    4. 10.4 Electrostatic Discharge Caution
    5. 10.5 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

8.1 Overview

The TPS4811x-Q1 family is a 100V smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V – 80V, the device is an excellent choice for 12V, 24V, and 48V system designs.

The device has a strong 3.7A peak source (PU) and 4A peak sink (PD) GATE driver that enables power switching using parallel FETs in high current system designs. Use INP as the gate driver control input. MOSFET slew rate control (ON and OFF) is possible by placing external R-C components.

The device has accurate current sensing (±2% at 30mV VSNS) output (IMON) enabling systems for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured.

The device features remote overtemperature protection with FLT_T output enabling robust system protection.

TPS48110Q1 has an accurate overvoltage protection (< ±2%), providing robust load protection.

The TPS48111Q1 integrates a pre-charge driver (G) with control input (INP_G). This feature enables system designs that need to drive large capacitive loads by pre-charging first and then turning ON the main power FETs.

TPS4811x-Q1 has an accurate undervoltage protection (< ±2%) using EN/UVLO pin. Pull EN/UVLO low (< 0.3V) to turn OFF the device and enter into shutdown state. In shutdown mode, the controller draws a total shutdown current of 1.6µA at 48V supply input.