SLUUC71 May   2021 TCAN1162-Q1 , TCAN11623-Q1 , TCAN11625-Q1

 

  1. 1Trademarks
  2. 2Introduction
    1. 2.1 Features
    2. 2.2 Description
  3. 3EVM Setup and Features Explained
    1. 3.1 Evaluation Equipment
    2. 3.2 Jumpers, and Test Points
    3. 3.3 Connectors
    4. 3.4 TS Indication
    5. 3.5 Mode Control
      1. 3.5.1 Wake Pushbutton
      2. 3.5.2 nSLP Pull-Up
    6. 3.6 TXD Input
    7. 3.7 RXD Output
    8. 3.8 INH Pull-Down
  4. 4Schematic and Bill of Materials
    1. 4.1 Schematic
    2. 4.2 Bill of Materials

3.3 Connectors

Table 3-2 lists the connectors available on the TCAN1162EVM.

Table 3-2 TCAN1162EVM Connector Description
DesignatorDescriptionFunction
J1Banana JackVSUP supply connection for EVM
J2Banana JackVIO supply connection for EVM
J3Banana JackPower return (GND) supply connection for EVM
J42x1 HeaderTwo-pin header for VSUP and GND connection
J52x1 HeaderTwo-pin header for VIO and GND connection
J76x1 HeaderPins 1 & 2 - GND

Pin 3 - CANH

Pin 4 - CANL

Pins 5 & 6 - GND

J10DSUB9 ConnectorPin 1 - No connect

Pin 2 - CANL

Pin 3 - GND

Pin 4 - No connect

Pin 5 - High impedance connection to GND

Pin 6 - GND

Pin 7 - CANH

Pin 8 - No connect

Pin 9 - VSUP

J115x2 HeaderPins 2, 4, 6, 8, 10 - GND

Pin 1 - VIO

Pin 3 - RXD

Pin 5 - TXD

Pin 7 - nSLP

Pin 9 - TS

J132x1 HeaderPin 1 - CAN bus common-mode signal

Pin 2 - GND

J172x1 HeaderPin 1 - nRST pin

GND