SLVAG09 September   2025 TPS1HTC100-Q1 , TPS1HTC30-Q1 , TPS2HC08-Q1 , TPS2HCS08-Q1 , TPS482H85-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
    1. 1.1 Capacitive Load Nature
  5. 2Current Limit and Thermal Protection
  6. 3Test Setup and Conditions
    1. 3.1 Probe and Jumper Configuration
  7. 4Results
    1. 4.1 Example Waveforms
    2. 4.2 48V Application Devices
  8. 5Additional Information
  9. 6Summary
  10. 7References

3.1 Probe and Jumper Configuration

Refer to Figure 3-1 and Figure 3-2 for the jumper configuration (yellow), probe (red) locations, and an image of the test setup.

EVM Jumper and Probe Configuration Figure 3-1 EVM Jumper and Probe Configuration
Setup Figure 3-2 Setup