SLVSCP3D January   2015  – November 2025 TPS7B4253-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Short Circuit and Overcurrent Protection
      2. 6.3.2 Integrated Inductive Clamp Protection
      3. 6.3.3 OUT Short to Battery and Reverse Polarity Protection
      4. 6.3.4 Undervoltage Shutdown
      5. 6.3.5 Thermal Protection
      6. 6.3.6 Regulated Output (OUT)
      7. 6.3.7 Enable (EN)
      8. 6.3.8 Adjustable Output Voltage (FB and ADJ)
        1. 6.3.8.1 OUT Voltage Equal to the Reference Voltage
        2. 6.3.8.2 OUT Voltage Higher Than Reference Voltage
        3. 6.3.8.3 Output Voltage Lower Than Reference Voltage
    4. 6.4 Device Functional Modes
      1. 6.4.1 Operation With VIN < 4V
      2. 6.4.2 Operation With EN Control
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1 Application With Output Voltage Equal to the Reference Voltage
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
          1. 7.2.1.2.1 Input Capacitor
          2. 7.2.1.2.2 Output Capacitor
        3. 7.2.1.3 Application Curve
      2. 7.2.2 High-Side Switch Configuration
      3. 7.2.3 High Accuracy LDO
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Power Dissipation and Thermal Considerations
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Device Nomenclature
      2. 8.1.2 Development Support
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 Receiving Notification of Documentation Updates
    4. 8.4 Support Resources
    5. 8.5 Trademarks
    6. 8.6 Electrostatic Discharge Caution
    7. 8.7 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information
    1. 10.1 Mechanical Data

6.3.5 Thermal Protection

The device incorporates a thermal shutdown (TSD) circuit as a protection from overheating. During continuous normal operation, the junction temperature must not exceed the TSD trip point. If the junction temperature exceeds the TSD trip point, the output turns off. When the junction temperature decreases to 15°C (typical) lower than the TSD trip point, the output turns on.

Note:

The purpose of the design of the internal protection circuitry of the TPS7B4253-Q1 device is to protect against overload conditions and is not intended as a replacement for proper heat-sinking. Continuously running the device into thermal shutdown degrades device reliability.