SLVSHO1B March 2025 – October 2026 TPS1689
PRODUCTION DATA
Table 7-6 shows the list of PMBus® commands supported by the TPS1689x eFuse.
| COMMAND NAME | CODE | TYPE | DESCRIPTION | PMBus®TRANSACTION | DEFAULT VALUE | STORED IN ON-CHIP NON-VOLATILE MEMORY | STORED IN EEPROM |
|---|---|---|---|---|---|---|---|
| OPERATION |
01h |
Control |
eFuse ON/OFF control |
Read/Write byte with PEC |
0x80 |
N/A |
N/A |
| CLEAR_FAULTS |
03h |
Control | Clear all fault status bits and Blackbox RAM |
Send byte with PEC |
N/A | N/A | N/A |
| RESTORE_FACTORY_DEFAULTS |
12h |
Control | Initialize/Reset all configuration registers to the factory default values | Send byte with PEC | N/A | N/A |
N/A |
| STORE_USER_ALL |
15h |
Control | Store configuration values to NVM/EEPROM | Send byte with PEC | N/A | N/A |
N/A |
| RESTORE_USER_ALL |
16h |
Control | Initialize all configuration registers with the user programmed values stored in NVM/EEPROM | Send byte with PEC | N/A | N/A |
N/A |
| BB_ERASE |
F5h |
Control | Erase Blackbox data in external EEPROM | Send byte with PEC | N/A | N/A |
N/A |
| FETCH_BB_EEPROM |
F6h |
Control | Fetch Blackbox EEPROM contents into internal shadow registers | Send byte with PEC | N/A | N/A |
N/A |
| CLEAR_BB_RAM | FCh | Control | Clears the contents of bbox RAM | Send byte with PEC | N/A | N/A | N/A |
| POWER_CYCLE |
D9h |
Control |
Power down output and restart after a delay programmed through the RETRY_CONFIG register |
Send byte with PEC | N/A | N/A |
N/A |
| MFR_WRITE_PROTECT |
F8h |
Control | Enable/Disable write protection for OPERATION and POWER_CYCLE commands, configuration registers, NVM, and EEPROM | Read/write byte with PEC |
0x00 |
N/A |
N/A |
| CAPABILITY |
19h |
Telemetry |
Supported PMBus® features | Read byte with PEC |
0xD0 |
Y |
N |
| STATUS_BYTE |
78h |
Telemetry | Status register lower byte | Read byte with PEC |
Undefined |
N |
N |
| STATUS_WORD |
79h |
Telemetry | Status register word | Read word with PEC | Undefined |
N |
Y |
| STATUS_OUT |
7Ah |
Telemetry | OUT bus status | Read byte with PEC | Undefined |
N |
N |
| STATUS_IOUT |
7Bh |
Telemetry | OUT current status | Read byte with PEC | Undefined |
N |
N |
| STATUS_INPUT |
7Ch |
Telemetry |
IN bus status |
Read byte with PEC | Undefined |
N |
Y |
| STATUS_TEMP |
7Dh |
Telemetry | Device temperature status | Read byte with PEC | Undefined |
N |
N |
| STATUS_CML |
7Eh |
Telemetry | Communications, Memory, Logic status | Read byte with PEC | Undefined |
N |
N |
| STATUS_MFR_SPECIFIC |
80h |
Telemetry | Manufacturer specific fault status | Read byte with PEC | Undefined |
N |
Y |
| STATUS_MFR_SPECIFIC _2 |
F3h |
Telemetry | Additional manufacturer specific fault status | Read word with PEC |
0x00 |
N |
N |
| PMBUS_REVISION |
98h |
Telemetry | PMBus®
Specifications Part I and II rev 1.3 |
Read byte with PEC |
0x33 |
Y |
N |
| MFR_ID |
99h |
Telemetry |
Manufacturer name |
Block read 2 bytes with PEC |
"TI" |
Y |
N |
| MFR_MODEL |
9Ah |
Telemetry | Device name | Block read 8 bytes with PEC |
"TPS1689x" |
Y |
N |
| MFR_REVISION |
9Bh |
Telemetry |
Device revision |
Block read 1 byte with PEC |
0x01 |
Y |
N |
| READ_VIN |
88h |
Telemetry | Input voltage | Read word with PEC | Undefined |
N |
N |
| READ_VOUT |
8Bh |
Telemetry | Output voltage | Read word with PEC | Undefined |
N |
N |
| READ_IIN |
89h |
Telemetry |
Input current |
Read word with PEC | Undefined |
N |
N |
| READ_TEMPERATURE_1 |
8Dh |
Telemetry | Device temperature | Read word with PEC | Undefined |
N |
N |
| READ_VAUX |
D0h |
Telemetry |
Auxiliary analog input voltage |
Read word with PEC | Undefined |
N |
N |
| READ_PIN |
97h |
Telemetry |
Instantaneous input power |
Read word with PEC | Undefined |
N |
N |
| READ_EIN |
86h |
Telemetry |
Accumulated input energy |
Block read 6 bytes with PEC | Undefined |
N |
N |
| READ_VIN_AVG |
DCh |
Telemetry |
Average input voltage |
Read word with PEC | Undefined |
N |
N |
| READ_VIN_MIN |
D1h |
Telemetry | Minimum input voltage | Read word with PEC | Undefined |
N |
N |
| READ_VIN_PEAK |
D2h |
Telemetry | Peak input voltage | Read word with PEC | Undefined |
N |
Y |
| READ_VOUT_AVG |
DDh |
Telemetry | Average output voltage | Read word with PEC | Undefined |
N |
N |
| READ_VOUT_MIN |
DAh |
Telemetry | Minimum output voltage | Read word with PEC | Undefined |
N |
N |
| READ_IIN_AVG |
DEh |
Telemetry |
Average input current |
Read word with PEC | Undefined |
N |
N |
| READ_IIN_PEAK |
D4h |
Telemetry |
Peak input current |
Read word with PEC | Undefined |
N |
Y |
| READ_TEMP_AVG |
D6h |
Telemetry |
Average device temperature |
Read word with PEC | Undefined |
N |
N |
| READ_TEMP_PEAK |
D7h |
Telemetry |
Peak device temperature |
Read word with PEC | Undefined |
N |
Y |
| READ_PIN_AVG |
DFh |
Telemetry | Average input power | Read word with PEC | Undefined |
N |
N |
| READ_PIN_PEAK |
D5h |
Telemetry |
Peak input power |
Read word with PEC | Undefined |
N |
N |
| READ_SAMPLE_BUF |
D8h |
Telemetry |
ADC sample buffer |
Block read 64 bytes with PEC | Undefined |
N |
N |
| READ_BB_RAM |
FDh |
Telemetry |
Blackbox RAM registers |
Block read 7 bytes with PEC | Undefined |
N |
Y |
| READ_BB_EEPROM |
F4h |
Telemetry |
Blackbox EEPROM content |
Block read 16 bytes with PEC | Undefined |
N |
Y |
| BB_TIMER |
FAh |
Telemetry |
Blackbox tick timer |
Read byte with PEC | Undefined |
N |
Y |
| PMBUS_ADDR |
FBh |
Configuration |
PMBus® device address for ADDR0 = Open and ADDR1 = Open setting |
Read/write byte with PEC |
0x40 |
Y |
Y |
| VIN_UV_WARN |
58h |
Configuration | Input undervoltage warning threshold | Read/write word with PEC |
0x0020 |
N |
N |
| VIN_UV_FLT |
59h |
Configuration | Input undervoltage fault threshold | Read/write word with PEC |
0x001F |
Y |
Y |
| VIN_OV_WARN |
57h |
Configuration | Input overvoltage warning threshold | Read/write word with PEC |
0x00A4 |
N |
N |
| VIN_OV_FLT |
55h |
Configuration | Input overvoltage fault threshold | Read/write word with PEC |
0x00AF |
Y |
Y |
| VOUT_UV_WARN | 43h | Configuration | Output undervoltage warning threshold | Read/write word with PEC |
0x0020 |
N |
N |
|
VOUT_PGTH |
5Fh |
Configuration | Output threshold for Power Good de-assertion | Read/write word with PEC |
0x001D |
Y |
Y |
|
OT_WARN |
51h |
Configuration | Overtemperature warning threshold | Read/write word with PEC |
0x007C |
N |
N |
|
OT_FLT |
4Fh |
Configuration | Overtemperature fault threshold | Read/write word with PEC |
0x0084 |
Y |
Y |
| PIN_OP_WARN |
6Bh |
Configuration | Input overpower warning threshold | Read/write word with PEC |
0x0055 |
N |
N |
| IIN_OC_WARN |
5Dh |
Configuration | Input overcurrent warning threshold | Read/write word with PEC |
0x007F |
N |
N |
|
VIREF |
E0h |
Configuration |
Reference voltage for current regulation and protection blocks |
Read/write byte with PEC |
0x32 |
Y |
Y |
| AUX/TEMP/EEDATA/EECLK/GPIOx configuration |
E1h |
Configuration | AUX/EEDATA/GPIO2 and AUX/EECLK/GPIO1 pin configuration | Read/write byte with PEC |
0x00 |
Y |
Y |
|
SMBA_FLT_CONFIG |
E2h |
Configuration | SMBA/FLT pin configuration | Read/write byte with PEC |
0x00 |
Y |
Y |
| ALERT_MASK |
DBh |
Configuration | SMB Alert assertion mask | Read/write word with PEC |
0x0100 |
N |
N |
| FAULT_MASK |
E3h |
Configuration | FLT assertion mask | Read/write word with PEC |
0x0000 |
Y |
Y |
| DEVICE_CONFIG |
E4h |
Configuration | Device configuration | Read/write word with PEC |
0x1400 |
Y |
Y |
| BB_CONFIG |
E5h |
Configuration | Blackbox configuration | Read/write byte with PEC |
0x00 |
Y |
Y |
|
OC_TIMER |
E6h |
Configuration | Transient overcurrent blanking timer | Read/write byte with PEC |
0x14 |
N |
N |
|
RETRY_CONFIG |
E7h |
Configuration |
Auto-retry configuration |
Read/write byte with PEC |
0x84 |
Y |
Y |
| ADC_CONFIG_1 |
E8h |
Configuration | ADC Configuration | Read/write byte with PEC |
0x00 |
N |
N |
| ADC_CONFIG_2 |
E9h |
Configuration | ADC Configuration | Read/write byte with PEC |
0x00 |
N |
N |
| PK_MIN_AVG |
EAh |
Configuration | Peak/Min/Average configuration | Read/write byte with PEC |
0x00 |
N |
N |
| PSU_VOLTAGE |
ECh |
Configuration |
PSU nominal voltage |
Read/write byte with PEC |
0xA3 |
N |
N |
| INS_DLY |
F9h |
Configuration |
Insertion delay |
Read/write byte with PEC |
0x00 |
Y |
Y |
| IMON OFFSET CALIBRATION | F2h | Configuration | Configuration for IMON offset | Read/write byte | 0x00 | Y | Y |
| LOAD_IMON_OFFSET | CAh |
Control |
NA | 0x00 | Y | Y |