SLVSMQ2 July   2026 DLPC8545 , DLPC8555

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
    1.     6
    2. 4.1  Initialization, Board Level Test, and Debug
    3. 4.2  V-by-One Interface Input Data and Control
    4. 4.3  DSI Input Data and Clock
    5. 4.4  DMD SubLVDS Interface
    6. 4.5  DMD Reset and Low Speed Interfaces
    7. 4.6  Flash Interface
    8. 4.7  Peripheral Interfaces
    9. 4.8  GPIO Peripheral Interface
    10. 4.9  Clock and PLL Support
    11. 4.10 Power and Ground
    12. 4.11 I/O Type Subscript Definition
    13. 4.12 Internal Pullup and Pulldown Characteristics
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2.     21
    3. 5.2  ESD Ratings
    4. 5.3  Recommended Operating Conditions
    5. 5.4  Thermal Information
    6. 5.5  Power Electrical Characteristics
    7. 5.6  Pin Electrical Characteristics
    8. 5.7  DMD SubLVDS Interface Electrical Characteristics
    9.     28
    10. 5.8  DMD Low Speed Interface Electrical Characteristics
    11.     30
    12. 5.9  V-by-One Interface Electrical Characteristics
    13. 5.10 USB Electrical Characteristics
    14.     33
    15. 5.11 System Oscillator Timing Requirements
    16.     35
    17. 5.12 Power Supply and Reset Timing Requirements
    18.     37
    19. 5.13 V-by-One Interface General Timing Requirements
    20.     39
    21. 5.14 Flash Interface Timing Requirements
    22.     41
    23. 5.15 Source Frame Timing Requirements
    24.     43
    25. 5.16 Synchronous Serial Port Interface Timing Requirements
    26.     45
    27. 5.17 I2C Interface Timing Requirements
    28. 5.18 Programmable Output Clock Timing Requirements
    29. 5.19 JTAG Boundary Scan Interface Timing Requirements (Debug Only)
    30.     49
    31. 5.20 DMD Low Speed Interface Timing Requirements
    32.     51
    33. 5.21 DMD SubLVDS Interface Timing Requirements
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagrams
    3. 6.3 Feature Description
      1. 6.3.1 Input Sources
      2. 6.3.2 V-by-One Interface
      3. 6.3.3 DMD (SubLVDS) Interface
      4. 6.3.4 Serial Flash Interface
      5. 6.3.5 GPIO Supported Functionality
        1.       62
      6. 6.3.6 Debug Support
  8. 7 Power Supply Recommendations
    1. 7.1 System Power-Up and Power-Down Sequence
    2. 7.2 DMD Fast Park Control (PARKZ)
    3. 7.3 Power Supply Management
    4. 7.4 Hotplug Usage
    5. 7.5 Power Supplies for Unused Input Source Interfaces
  9. 8 Layout
    1. 8.1 Layout Guidelines
      1. 8.1.1 Layout Guideline for DLPC8545, or DLPC8555 Reference Clock
        1. 8.1.1.1 Recommended Clock Oscillator Configuration
      2. 8.1.2 V-by-One Interface Layout Considerations
      3. 8.1.3 DMD Maximum Pin-to-Pin, PCB Interconnects Etch Lengths
      4. 8.1.4 Power Supply Layout Guidelines
    2. 8.2 Thermal Considerations
  10. 9 Device and Documentation Support
    1. 9.1 Third-Party Products Disclaimer
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 Receiving Notification of Documentation Updates
    4. 9.4 Support Resources
    5. 9.5 Device Nomenclature
      1. 9.5.1 Device Markings
    6. 9.6 Trademarks
    7. 9.7 Electrostatic Discharge Caution
    8. 9.8 Glossary
      1. 9.8.1 Video Timing Parameter Definitions
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Table 6-14 GPIO Supported Functionality - LED and RGB Laser (Primary controller)
GPIO SIGNAL NAME DESCRIPTION
GPIO_00 SSP1_SCLK (I) SSP Target
GPIO_01 SSP1_DI (I) SSP Target
GPIO_02 SSP1_DO (O) SSP Target
GPIO_03 SSP1_CSZ0 (I) SSP Target
GPIO_04 SSP1_CSZ1 (I) SSP Target
GPIO_05 HOST_IRQ (I) Command execution status
GPIO_06 SSP1_BCSZ (I) SSP Target
GPIO_07 IIC1_SCL (B) I2C Target
GPIO_08 IIC1_SDA (B) I2C Target
GPIO_09 WPC_COLOR_SENSOR_VSYNC (O) White Point Correction Sync
GPIO_10 UART1_TXD (O)
GPIO_11 UART1_RXD (I)
GPIO_12 General Purpose Input/Output
GPIO_13 RED_ENABLE (O) See (1)
GPIO_14 GREEN_ENABLE (O) See (1)
GPIO_15 BLUE_ENABLE (O) See (1)
GPIO_16 General Purpose Input/Output
GPIO_17 3D LR reference (O) DMD left / right frame indicator
GPIO_18 PS_SYNC (O) Synchronization between primary and secondary controller
GPIO_19 General Purpose Input/Output
GPIO_20 Laser_Enable For enabling illumination
GPIO_21 General Purpose Input/Output
GPIO_22 General Purpose Input/Output
GPIO_23 LL_FAULT (O) Fault signal used to monitor system faults,
GPIO_24 SP_SYNC (I) Synchronization between primary and secondary controller
GPIO_25 RED_PWM (O) See (1)
GPIO_26 GREEN_PWM (O) See (1)
GPIO_27 BLUE_PWM (O) See (1)
GPIO_28 YELLOW_PWM (O) See (1)
GPIO_29 General Purpose Input/Output
GPIO_30 PS_SYNC (O) Synchronization between primary and secondary controller
GPIO_31 PS_SYNC (O) Synchronization between primary and secondary controller
GPIO_32 SP_SSYNC (I) Synchronization between primary and secondary controller
GPIO_33 SP_SYNC (I) Synchronization between primary and secondary controller
GPIO_34 3D L/R Indicator (I) 3D L/R frame indicator to controller
GPIO_35 General Purpose Input/Output
GPIO_36 General Purpose Input/Output
GPIO_37 General Purpose Input/Output
GPIO_38 PS_SYNC (O) Synchronization between primary and secondary controller
GPIO_39 PS_SYNC (B) Synchronization between primary and secondary controller
GPIO_40 4 way XPR (O)
GPIO_41 4 way XPR (O)
GPIO_42 4 way XPR (O)
GPIO_43 4 way XPR (O)
GPIO_44 4 way XPR (O)
GPIO_45 4 way XPR (O)
GPIO_46 4 way XPR (O)
GPIO_47 4 way XPR (O)
GPIO_48 4 way XPR (O)
GPIO_49 4 way XPR (O)
GPIO_50 4 way XPR (O)
GPIO_51 4 way XPR (O)
Laser safety features, can be used depending on customer application, are outside the scope of TI software and are the responsibility of the customer when these signals are used to drive LASER illumination sources
Table 6-15 GPIO Supported Functionality - LED and RGB Laser (Secondary controller)
GPIO SIGNAL NAME DESCRIPTION
GPIO_00 SSP1_SCLK (I) SSP Target
GPIO_01 SSP1_DI (I) SSP Target
GPIO_02 SSP1_DO (O) SSP Target
GPIO_03 SSP1_CSZ0 (I) SSP Target
GPIO_04 SSP1_CSZ1 (I) SSP Target
GPIO_05 HOST_IRQ (I) Command execution status
GPIO_06 SSP1_BCSZ (I) SSP Target
GPIO_07 IIC1_SCL (B) I2C Target
GPIO_08 IIC1_SDA (B) I2C Target
GPIO_09 General Purpose Input/Output
GPIO_10 UART1_TXD (O)
GPIO_11 UART1_RXD (I)
GPIO_12 General Purpose Input/Output
GPIO_13 General Purpose Input/Output
GPIO_14 General Purpose Input/Output
GPIO_15 General Purpose Input/Output
GPIO_16 General Purpose Input/Output
GPIO_17 General Purpose Input/Output
GPIO_18 PS_SYNC (I) Synchronization between primary and secondary controller
GPIO_19 General Purpose Input/Output
GPIO_20 General Purpose Input/Output
GPIO_21 General Purpose Input/Output
GPIO_22 General Purpose Input/Output
GPIO_23 LL_FAULT (O) Fault signal used to monitor system faults,
GPIO_24 SP_SYNC (O) Synchronization between primary and secondary controller
GPIO_25 General Purpose Input/Output
GPIO_26 General Purpose Input/Output
GPIO_27 General Purpose Input/Output
GPIO_28 DMD_LS_PWR (O) DMD Lowspeed Interface signal
GPIO_29 General Purpose Input/Output
GPIO_30 PS_SYNC (I) Synchronization between primary and secondary controller
GPIO_31 PS_SYNC (I) Synchronization between primary and secondary controller
GPIO_32 SP_SSYNC (O) Synchronization between primary and secondary controller
GPIO_33 SP_SYNC (O) Synchronization between primary and secondary controller
GPIO_34 3D L/R Indicator (I) 3D L/R frame indicator to controller
GPIO_35 General Purpose Input/Output
GPIO_36 General Purpose Input/Output
GPIO_37 General Purpose Input/Output
GPIO_38 PS_SYNC (I) Synchronization between primary and secondary controller
GPIO_39 PS_SYNC (B) Synchronization between primary and secondary controller
GPIO_40 General Purpose Input/Output
GPIO_41 General Purpose Input/Output
GPIO_42 General Purpose Input/Output
GPIO_43 General Purpose Input/Output
GPIO_44 General Purpose Input/Output
GPIO_45 General Purpose Input/Output
GPIO_46 General Purpose Input/Output
GPIO_47 General Purpose Input/Output
GPIO_48 General Purpose Input/Output
GPIO_49 General Purpose Input/Output
GPIO_50 General Purpose Input/Output
GPIO_51 General Purpose Input/Output