SLVUCS0 july   2023

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Modification
    2. 2.2 Connector and Test Point Descriptions
    3. 2.3 Jumper Configuration
      1. 2.3.1 JP1 (ENABLE)
      2. 2.3.2 JP5 (SYNC)
      3. 2.3.3 JP6 (MODE)
      4. 2.3.4 JP7 (EXTVCC)
    4. 2.4 Test Procedure
  9. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials
  10. 4Additional Information
    1.     Trademarks

2.3.3 JP6 (MODE)

MODE pin input jumper. Place a jumper across MODE and VCC to set in forced PWM mode, place a jumper across MODE and GND to set in auto PFM mode.