SLVUCS0 july   2023

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Modification
    2. 2.2 Connector and Test Point Descriptions
    3. 2.3 Jumper Configuration
      1. 2.3.1 JP1 (ENABLE)
      2. 2.3.2 JP5 (SYNC)
      3. 2.3.3 JP6 (MODE)
      4. 2.3.4 JP7 (EXTVCC)
    4. 2.4 Test Procedure
  9. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials
  10. 4Additional Information
    1.     Trademarks

2.3.1 JP1 (ENABLE)

The JP1 jumper enables the device. By default, this jumper is set to the ON position. Put this jumper in the OFF position to disable the output.