SLVUD94 September   2025 UCC27734 , UCC27734-Q1 , UCC27735 , UCC27735-Q1

 

  1.   1
  2. 1Description
  3. 2Features
  4. 34
  5. 3Evaluation Module Overview
    1. 3.1 Introduction
    2. 3.2 Kit Contents
    3. 3.3 Specifications
    4. 3.4 Device Information
  6. 4Hardware
    1. 4.1 Definitions
    2. 4.2 Equipment
      1. 4.2.1 Power Supply
      2. 4.2.2 Function Generator
      3. 4.2.3 DMM
      4. 4.2.4 Oscilloscope
    3. 4.3 Connection Descriptions
  7. 5Implementation Results
    1. 5.1 Evaluation Setup
      1. 5.1.1 DC Power Supply Settings
      2. 5.1.2 Digital Multi-Meter Settings
      3. 5.1.3 Two-Channel Function Generator Settings
      4. 5.1.4 Oscilloscope Settings
      5. 5.1.5 Bench Setup Diagram
    2. 5.2 External Bootstrap Diode
    3. 5.3 Power Up and Power Down Procedure
      1. 5.3.1 Power Up
      2. 5.3.2 Power Down
    4. 5.4 Typical Performance Waveforms (CL = 1000pF)
      1. 5.4.1 Propagation Delays
  8. 6Hardware Design Files
    1. 6.1 Schematic
    2. 6.2 PCB Layouts
    3. 6.3 Bill of Materials (BOM)
  9. 7Additional Information
    1. 7.1 Trademarks

5.2 External Bootstrap Diode

The UCC27735Q1EVM has an external bootstrap diode included and a 2.2Ω series resistor (R2).

As a general guideline TI recommends making provisions for resistance in series with the bootstrap diode. A value of 2.2Ω to 10Ω is recommended.