SLVUD94 September   2025

 

  1.   1
  2. 1Description
  3. 2Features
  4. 34
  5. 3Evaluation Module Overview
    1. 3.1 Introduction
    2. 3.2 Kit Contents
    3. 3.3 Specifications
    4. 3.4 Device Information
  6. 4Hardware
    1. 4.1 Definitions
    2. 4.2 Equipment
      1. 4.2.1 Power Supply
      2. 4.2.2 Function Generator
      3. 4.2.3 DMM
      4. 4.2.4 Oscilloscope
    3. 4.3 Connection Descriptions
  7. 5Implementation Results
    1. 5.1 Evaluation Setup
      1. 5.1.1 DC Power Supply Settings
      2. 5.1.2 Digital Multi-Meter Settings
      3. 5.1.3 Two-Channel Function Generator Settings
      4. 5.1.4 Oscilloscope Settings
      5. 5.1.5 Bench Setup Diagram
    2. 5.2 External Bootstrap Diode
    3. 5.3 Power Up and Power Down Procedure
      1. 5.3.1 Power Up
      2. 5.3.2 Power Down
    4. 5.4 Typical Performance Waveforms (CL = 1000pF)
      1. 5.4.1 Propagation Delays
  8. 6Hardware Design Files
    1. 6.1 Schematic
    2. 6.2 PCB Layouts
    3. 6.3 Bill of Materials (BOM)
  9. 7Additional Information
    1. 7.1 Trademarks

4.1 Definitions

This procedure details how to configure the UCC27735Q1EVM evaluation board. Within this test procedure, the following naming conventions are applied. Refer to the UCC27735Q1EVM Bench Setup Diagram and Configuration, Figure 5-1, for details.

DMM: Digital multimeter

EVM: Evaluation module