SLVUD94 September   2025 UCC27734 , UCC27734-Q1 , UCC27735 , UCC27735-Q1

 

  1.   1
  2. 1Description
  3. 2Features
  4. 34
  5. 3Evaluation Module Overview
    1. 3.1 Introduction
    2. 3.2 Kit Contents
    3. 3.3 Specifications
    4. 3.4 Device Information
  6. 4Hardware
    1. 4.1 Definitions
    2. 4.2 Equipment
      1. 4.2.1 Power Supply
      2. 4.2.2 Function Generator
      3. 4.2.3 DMM
      4. 4.2.4 Oscilloscope
    3. 4.3 Connection Descriptions
  7. 5Implementation Results
    1. 5.1 Evaluation Setup
      1. 5.1.1 DC Power Supply Settings
      2. 5.1.2 Digital Multi-Meter Settings
      3. 5.1.3 Two-Channel Function Generator Settings
      4. 5.1.4 Oscilloscope Settings
      5. 5.1.5 Bench Setup Diagram
    2. 5.2 External Bootstrap Diode
    3. 5.3 Power Up and Power Down Procedure
      1. 5.3.1 Power Up
      2. 5.3.2 Power Down
    4. 5.4 Typical Performance Waveforms (CL = 1000pF)
      1. 5.4.1 Propagation Delays
  8. 6Hardware Design Files
    1. 6.1 Schematic
    2. 6.2 PCB Layouts
    3. 6.3 Bill of Materials (BOM)
  9. 7Additional Information
    1. 7.1 Trademarks

3.3 Specifications

Refer to the UCC2773x Data Sheet and UCC2773x-Q1 Data Sheet for the full range of recommended operating specifications and design guidelines for driving loads.

CAUTION:

The UCC27735Q1EVM is designed for low-voltage evaluation only, and is not certified for evaluation with voltages beyond the absolute maximums listed in the electrical specifications. Do not evaluate high-voltage parameters with this board.