SLVUE59 September 2026
The AMC4330R and AMC0302R both have a single-ended ratiometric output voltage that depends on a stable reference voltage. The full-scale output voltage is set by the REFIN pin. For any input voltage within the specified linear input range, the device outputs a voltage equal to:
The associated errors in both the voltage and current measurements follows Equation 2:
The only difference is the analog input voltage range of the two devices used on the EVM. The AMC4330R Vin range is ±1V with clipping at ±1.28V and the AMC0302R input range is ±50mV with clipping at ±64mV. The following section describes the test results associated with the AMC-AMP-VI-EVM.