SNLU334 December   2023 DS320PR410

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1  DS320PR410 5-Level I/O Control Inputs
    2. 2.2  DS320PR410 Modes of Operation
    3. 2.3  DS320PR410 SMBus or I2C Register Control Interface
    4. 2.4  DS320PR410 Equalization Control
    5. 2.5  DS320PR410 RX Detect State Machine
    6. 2.6  DS320PR410 DC Gain Control
    7. 2.7  DS320PR410 EVM Global Controls
    8. 2.8  DS320PR410-RSC-EVM Downstream Devices Control
    9. 2.9  DS320PR410-RSC-EVM Upstream Devices Control
    10. 2.10 Quick-Start Guide (Pin Mode)
    11. 2.11 Quick-Start Guide (SMBus / I2C Secondary Mode)
  9. 3Implementation Results
    1. 3.1 Test Setup and Results
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 Board Layout
    3. 4.3 Bill of Materials
  11. 5Additional Information
    1.     Trademarks
  12. 6References

Get Started

  1. Order the DS320PR410-RSC-EVM on ti.com
  2. Read through the instructions provided in this User's Guide to understand the jumper options provided on the DS320PR410-RSC-EVM and for instructions to configure the EVM.
  3. For EEPROM or SMBus / I2C programming, visit the TI SigCon Architect download page to install the Texas Instruments SigCon Architect GUI. To download the DS320PR410 SigCon Architect GUI profile, please contact your TI representative or create a request using TI E2E.