2 Setup

There are a few important connections to ensure the LP87524B/J/P-Q1 is configured correctly, each of which are described in this section. Good examples of how to connect the radar devices to the LP87524B/J/P-Q1 PMICs are shown in Figure 2-1, Figure 2-2 and Figure 2-3. LDOs are not required as the device meets noise and ripple specifications with LC filters. Refer to XWR1xxx Power Management Optimizations – Low Cost LC Filter Solution application report.

Figure 2-1 Typical Connection to LP87524B-Q1

Figure 2-2 Typical Connection to LP87524J-Q1

Figure 2-3 Typical Connection to LP87524P-Q1