SNVU786 May   2021 LP5860

 

  1.   Read This First
    1.     About This Manual
    2.     Notational Conventions
    3. 1.1 Glossary
    4.     Related Documentation
    5. 1.1 Support Resources
    6.     Trademarks
  2. 1Introduction/Feature Overview
    1. 1.1 Overview
    2. 1.2 Description
  3. 2 Register Maps
    1. 2.1  Register Map Table
    2. 2.2  CONFIG Registers
    3. 2.3  GROUP Registers
    4. 2.4  LED_DOT_GROUP Registers
    5. 2.5  LED_DOT_ONOFF Registers
    6. 2.6  FAULT_STATE Registers
    7. 2.7  LOD Registers
    8. 2.8  LSD Registers
    9. 2.9  LOD_CLR Registers
    10. 2.10 LSD_CLR Registers
    11. 2.11 RESET Registers
    12. 2.12 DC Registers
    13. 2.13 PWM Registers
  4. 3Revision History

2.11 RESET Registers

Table 2-180 lists the RESET registers. All register offset addresses not listed in Table 2-180 should be considered as reserved locations and the register contents should not be modified.

Reset

Table 2-180 RESET Registers
Address Acronym Register Name Section
A9h Reset Software reset register Go

2.11.1 Reset Register (Address = A9h) [Default = 0h]

Reset is shown in Figure 2-170 and described in Table 2-181.

Return to the Summary Table.

Figure 2-170 Reset Register
7 6 5 4 3 2 1 0
Reset
W-0h
Table 2-181 Reset Register Field Descriptions
Bit Field Type Default Description
7-0 Reset W 0h Write FFh to reset the device