TIDT367 December 2023
- 1
- Description
- Features
- Applications
-
1Test Prerequisites
- 1.1 Voltage and Current Requirements
- 1.2 Required Equipment
- 1.3 Test Setup
- 1.4
Running the Code for Different Labs
- 1.4.1 Lab 1. Primary to Secondary Power Flow, Open Loop Check PWM Driver
- 1.4.2 Lab 2. Primary to Secondary Power Flow, Open Loop CheckPWM Driver and ADC With Protection
- 1.4.3 Lab 3. Primary to Secondary Power Flow, Closed Voltage Loop Check
- 1.4.4 Lab 4. Primary to Secondary Power Flow, Closed Current Loop Check
- 1.4.5 Lab 6. Secondary to Primary Power Flow, Open Loop Check PWM Driver
- 1.4.6 Lab 7. Secondary to Primary Power Flow, Open Loop Check PWM Driver and ADC With Protection
- 1.4.7 Lab 8. Secondary to Primary Power Flow, Closed Voltage Loop Check
- 2Testing and Results
- 3Waveforms
2.4 Bode Plots
Bode plots are shown in the following figures.
Figure 2-7 SFRA Plant Measurement for the
Voltage Loop at Vprim 400 V, Vsec 40 V, 1600 W,Charging Mode
Figure 2-8 SFRA Plant Measurement for the
Voltage Loop at Vprim 400 V, Vsec 48 V, 1800 W,Charging Mode
Figure 2-9 SFRA Plant Measurement for the
Voltage Loop at Vprim 400 V, Vsec 60 V, 1800 W,Charging Mode
Figure 2-10 SFRA Plant Measurement for the
Current Loop at Vprim 400 V, Vsec 40 V, 1200 W,Charging Mode
Figure 2-11 SFRA Plant Measurement for the
Current Loop at Vprim 400 V, Vsec 48 V, 1800 W,Charging Mode
Figure 2-12 SFRA Plant Measurement for the
Current Loop at Vprim 400 V, Vsec 60 V, 1800 W,Charging Mode