16 MHz MCU with 8KB FLASH, 512B SRAM, 10-bit ADC, 2 OpAmp, I2C/SPI/UART
Product details
Parameters
Package | Pins | Size
Features
- Low Supply Voltage Range: 1.8 V to 3.6 V
- Ultra-Low Power Consumption
- Active Mode: 270 µA at 1 MHz, 2.2 V
- Standby Mode: 0.7 µA
- Off Mode (RAM Retention): 0.1 µA
- Ultra-Fast Wake-Up From Standby Mode in Less Than 1 µs
- 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time
- Basic Clock Module Configurations
- Internal Frequencies up to 16 MHz With Four Calibrated Frequencies to ±1%
- Internal Very-Low-Power Low-Frequency Oscillator
- 32-kHz Crystal
- High-Frequency (HF) Crystal up to 16 MHz
- Resonator
- External Digital Clock Source
- External Resistor
- 16-Bit Timer_A With Three Capture/Compare Registers
- 16-Bit Timer_B With Three Capture/Compare Registers
- Universal Serial Communication Interface
- Enhanced UART Supporting Auto-Baudrate Detection (LIN)
- IrDA Encoder and Decoder
- Synchronous SPI
- I2C™
- 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample-and-Hold, Autoscan, and Data Transfer Controller
- Two Configurable Operational Amplifiers (MSP430F22x4 Only)
- Brownout Detector
- Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
- Bootstrap Loader
- On-Chip Emulation Module
- Family Members Include:
- MSP430F2232: 8KB + 256B Flash Memory, 512B RAM
- MSP430F2252: 16KB + 256B Flash Memory, 512B RAM
- MSP430F2272: 32KB + 256B Flash Memory, 1KB RAM
- MSP430F2234: 8KB + 256B Flash Memory, 512B RAM
- MSP430F2254: 16KB + 256B Flash Memory, 512B RAM
- MSP430F2274: 32KB + 256B Flash Memory, 1KB RAM
- Available in a 38-Pin Thin Shrink Small-Outline Package (TSSOP) (DA), 40-Pin QFN Package (RHA), and 49-Pin Ball Grid Array Package (YFF)
- For Complete Module Descriptions, See the (SLAU144)
All trademarks are the property of their respective owners.
Description
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430F22x4/MSP430F22x2 series is an ultra-low-power mixed signal microcontroller with two built-in 16-bit timers, a universal serial communication interface, 10-bit A/D converter with integrated reference and data transfer controller (DTC), two general-purpose operational amplifiers in the MSP430F22x4 devices, and 32 I/O pins.
Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system. Stand-alone radio-frequency (RF) sensor front ends are another area of application.
Technical documentation
= Featured
Design & development
For additional terms or required resources, click any title below to view the detail page where available.Hardware development
Description
The MSP-TS430DA38 is a standalone ZIF socket target board used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.
Device Support: The MSP-TS430DA38 development board supports MSP430F22xx, MSP430G2x44 and MSP430G2x55 MCUs in a 38-pin (...)
Features
A separate debugging and programming interface is required to work with the MSP-TS430DA38. A flash emulation tool (FET) may be purchased independently (MSP-FET430UIF) or bundled with the MSP-TS430DA38 (MSP-FET430U38).
Software development
MSPWARE
— MSP430Ware is a collection of resources that help users to effectively create and build MSP430 code. These resources support ALL MSP430 microcontrollers (MCUs). As one user mentioned, “It’s essentially everything developers need to become MSP430 microcontroller experts!”
This complete collection of (...)
Features
- Collection of MSP design resources
- Available within CCS, as a standalone executable, or as part of TI’s new Cloud-based tools
- Auto-updates through the web
- Sleek & intuitive GUI for browsing content
- Features the MSP Driver Library
- Automatic filtering of content using a unique 2-pane view
SLAC123K.ZIP (767 KB)
MSP-DSPLIB
— The Texas Instruments MSP430™ Digital Signal Processing library is a set of highly optimized functions to perform many common signal processing operations on fixed-point numbers for MSP430 microcontrollers. This function set is typically used in applications where processing-intensive (...)
MSP-GRLIB
— The MSP Graphics Library is a royalty-free set of graphics primitives for creating graphical user interfaces on MSP430 and MSP432 microcontroller-based boards that have a graphical display. The graphical library consists of two building layers of functionality: the display driver layer, specific to (...)
Features
- Free license and royalty-free use
- Simplify and accelerate developmen tof applications
- Easy-to-maintain code
MSP-IQMATHLIB
— The Texas Instruments® MSP IQmath and Qmath Libraries are a collection of highly optimized and high-precision mathematical functions for C programmers to seamlessly port a floating-point algorithm into fixed-point code on MSP430 and MSP432 devices. These routines are typically used in (...)
Features
- Optimized fixed point functions - reduce development time and enable developers to focus on optimizing application code
- Up to 100x higher performance when executing common fixed point scalar math functions in CCS – this means the MSP microcontroller can remain in low power modes longer than (...)
MSPBSL
— Below are the steps needed in order to both understand and use the MSPBSL effectively across the MSP portfolio. For the most up to date information on what features the BSL on your device supports or which interface methods are needed to communicate with the BSL, please see “TABLE 1. Overview (...)
CCSTUDIO-MSP
—
Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)
ENERGYTRACE
— EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.
As most developers know, it is difficult to (...)
Features
- Current measurement is enabled for all MSP430 MCUs, MSP432 MCUs and connectivity devices
- Tracing of CPU states is available on selected MSP430 MCUs, MSP432 MCUs, CC13x2 wireless MCUs and CC26x2 wireless MCUs
- Tracing of peripheral states is also available on selected MSP430 MCUs, CC13x2 (...)
MSP430-GCC-OPENSOURCE
— MSP430™ and MSP432™ GCC open source packages are complete debugger and open source C/C++ compiler toolchains for building and debugging embedded applications based on MSP430 and MSP432 microcontrollers. These free GCC compilers support all MSP430 and MSP432 devices without code size limitations. In (...)
Features
- Available standalone or integrated within Code Composer Studio™
- No Code Size Limitation
- Free and Open-source
ULPADVISOR
— ULP (Ultra-Low Power) Advisor is a tool for guiding developers to write more efficient code to fully utilize the unique ultra-low power features of MSP and MSP432 microcontrollers. Aimed at both experienced and new microcontroller developers, ULP Advisor checks your code against a thorough ULP (...)
Features
- Seamless tool that provides easy-to-understand remarks for creating power-efficient code for all MSP devices
- Checks your code against a thorough ULP checklist
- Built in to Code Composer Studio and also available as a standalone executable
- Supports all MSP devices
- Wiki-based social online community for (...)
Provided by IAR Systems
— IAR Embedded Workbench for MSP430 (EW430)
IAR Embedded Workbench for MSP430 is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications based on MSP430 microcontrollers. The Debugger is a fully integrated debugger for source and disassembly level debugging (...)
IAR Embedded Workbench for MSP430 is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications based on MSP430 microcontrollers. The Debugger is a fully integrated debugger for source and disassembly level debugging (...)
MSP-FET
— To get started developing:
Step 1: Buy the MSP-FET
Step 2: Refer to the debuggers user’s guide and hardware user’s guide.
Step 3: Refer to debugging video
Step 1: Buy the MSP-FET
Step 2: Refer to the debuggers user’s guide and hardware user’s guide.
Step 3: Refer to debugging video
**The second generation of the MSP-FET is supported in the IDEs since Code Composer Studio™ v7.0, IAR EW430 v7.1 and IAR EWAR v8.10. For use (...)
Features
- USB debugging interface to connect any MSP430 MCU to a computer for real-time, in-system programming and debugging
- Enables EnergyTrace™ technology for energy measurement and debugging on all MSP430 and MSP432 devices in the Code Composer Studio and IAR Embedded Workbench development environments
- (...)
MSP-GANG
— The MSP Gang Programmer is a MSP430/MSP432 device programmer that can program up to eight identical MSP430/MSP432 Flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the (...)
Features
- Quickly and reliably program Flash or FRAM-based MSP devices via RS-232 or USB interface
- Several programming modes:
- Interactive Mode – Programming while connected to PC using the MSP GANG Programmer GUI
- Program from Image – An image can be stored, which contains configuration options and code (...)
MSP430-FLASHER
— MSP Flasher is an open-source, shell-based interface for programming MSP430™ microcontrollers (MCUs) and SimpleLink™ MSP432™ MCUs through a MSP Debug Stack and provides the most common functions on the command line. MSP Flasher can be used to download binary files (.txt/.hex) directly to the MSP (...)
Design tools & simulation
SLAM087.ZIP (43 KB) - TINA-TI Spice Model
SLAC060E.ZIP (97 KB)
CAD/CAE symbols
| Package | Pins | Download |
|---|---|---|
| TSSOP (DA) | 38 | View options |
| VQFN (RHA) | 40 | View options |
Ordering & quality
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.
Training series
View all TI training and videosVideos
Achieve Precise Measurement for Smoke Detector Designs
This video provides an introduction to the internal components of typical smoke detectors.
Posted: 03-Jan-2017
Duration: 06:26
Smoke/Heat Alarm End-Equipment Reference Diagrams
