TLV5616

ACTIVE

12-bit, single-channel, low-power, voltage output DAC with programmable settling time vs power

Top

Product details

Parameters

Resolution (Bits) 12 DAC channels 1 Interface type SPI Output type Buffered Voltage Settling time (µs) 3 Features Low Power Reference: type Ext Architecture String Rating Catalog Output range (Max) (mA/V) 5.1 Output range (Min) (mA/V) 0 Operating temperature range (C) -40 to 85, 0 to 70 open-in-new Find other Precision DACs (<=10MSPS)

Package | Pins | Size

PDIP (P) 8 93 mm² 9.81 x 9.43 SOIC (D) 8 19 mm² 3.91 x 4.9 VSSOP (DGK) 8 15 mm² 3 x 4.9 open-in-new Find other Precision DACs (<=10MSPS)

Features

  • 12-Bit Voltage Output DAC
  • Programmable Settling Time vs Power Consumption
    • 3 µs in Fast Mode
    • 9 µs in Slow Mode
    • Ultra Low Power Consumption:
    • 900 µW Typ in Slow Mode at 3 V
    • 2.1 mW Typ in Fast Mode at 3 V
  • Differential Nonlinearity . . . <0.5 LSB Typ
  • Compatible With TMS320 and SPI Serial Ports
  • Power-Down Mode (10 nA)
  • Buffered High-Impedance Reference Input
  • Voltage Output Range . . . 2 Times the Reference Input Voltage
  • Monotonic Over Temperature
  • Available in MSOP Package
open-in-new Find other Precision DACs (<=10MSPS)

Description

The TLV5616 is a 12-bit voltage output digital-to-analog converter (DAC) with a flexible 4-wire serial interface. The 4-wire serial interface allows glueless interface to TMS320, SPI, QSPI, and Microwire serial ports. The TLV5616 is programmed with a 16-bit serial string containing 4 control and 12 data bits. Developed for a wide range of supply voltages, the TLV5616 can operate from 2.7 V to 5.5 V.

The resistor string output voltage is buffered by a x2 gain rail-to-rail output buffer. The buffer features a Class AB output stage to improve stability and reduce settling time. The settling time of the DAC is programmable to allow the designer to optimize speed versus power dissipation. The settling time is chosen by the control bits within the 16-bit serial input string. A high-impedance buffer is integrated on the REFIN terminal to reduce the need for a low source impedance drive to the terminal.

Implemented with a CMOS process, the TLV5616 is designed for single supply operation from 2.7 V to 5.5 V. The device is available in an 8-terminal SOIC package. The TLV5616C is characterized for operation from 0°C to 70°C. The TLV5616I is characterized for operation from -40°C to 85°C.

open-in-new Find other Precision DACs (<=10MSPS)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 4
Type Title Date
* Datasheet 2.7 V to 5.5 V Low Power 12-Bit Digital-to-Analog Converters w/ Power Down datasheet (Rev. D) Apr. 08, 2004
Application note Low-Power Signal Conditioning For A Pressure Sensor (Rev. A) May 18, 2015
Application note Using SPI synchronous communication w/DACs:Interfacing the MSP430F149 & TLV5616 Mar. 02, 2005
Application note SPI-Based Data Acquisition/Monitor Using the TLC2551 Serial ADC (Rev. A) Nov. 20, 2001

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Software development

IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
DCPFREETOOL Software Plug-In to Code Composer Studio
DCPFREETOOL The data converter support plug-in is a free tool, which allows the user of Code Composer Studio™ to create initialization data and configuration software for Texas Instruments data converters based on inputs on a graphical user interface.

IMPORTANT: Please read the following before downloading the (...)

Features

The data converter support plug-in (DCP) is a component of TI's Code Composer Studio™ and offers easy-to-use windows for the "point-and-click" configuration of TI's data converters from within the integrated development environment (IDE), preventing illegal combinations of settings. The DCP (...)

Design tools & simulation

SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOL Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)

CAD/CAE symbols

Package Pins Download
PDIP (P) 8 View options
SOIC (D) 8 View options
VSSOP (DGK) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos