AFE7686
HF-Abtasttransceiver mit 4 Sende-, 4 Empfangskanälen, 100 MHz bis 5,2 GHz, max. 1200 MHz IBW, Dua
AFE7686
- 14-Bit resolution
- Sample rate:
- DAC: 9GSPS
- ADC: 3GSPS
- RF Frequency range: up to 5.2 GHz
- Maximum RF signal bandwidth
- Quad-channel mode (4T4R): 800 MHz (single-band); 300 MHz (dual-band)
- Dual-channel mode (2T2R): 1200 MHz (TX)/1000 MHz (RX) (single-band); 800MHz(dual-band)
- On-chip dual selectable DSAs per RX channel
- Integrated TX DSA functionality
- Digital:
- Dual band digital up-converters (DUCs)
- Dual Band digital down-converters (DDCs)
- 32-Bit NCOs for DUCs/DDCs
- Interpolation ratio: 6x, 8x, 9x, 12x, 16x, 18x, 24x, 36x
- Decimation ratio: /2, /3, /4, /6, /8, /9, /12, /16, /18, /24, /32
- RX/FB Dynamic switching for TDD
- Interface:
- 8 SerDes Transceivers up to 15Gbps
- 16-Bit and 12-bit JESD204B transport layer formatting with 8b/10b encoding
- Subclass 1 multi-device synchronization
- Clock:
- Internal PLL/VCO to generate DAC and ADC clocks
- Package: 17mm x 17mm FC BGA, 0.8mm pitch
- Power supplies: 1.85 V, 1.15 V, 1.0 V, –1.8 V
The AFE76xx is a family of high performance, quad/dual channel, 14-bit, integrated RF sampling analog front ends (AFEs) with 9 GSPS DACs and 3 GSPS ADCs, capable of synthesizing and digitizing wideband signals. High dynamic range allows the AFE76xx to generate and digitize 3G/4G signals for wireless base stations. In TDD mode, the receiver channel can be configured to dynamically switching between traffic receiver (TDD RX) status and wideband feedback receiver (TDD FB) status to assist DPD (Digital Pre-Distortion) of the Power Amplifier (PA) on the transmitter path.
The AFE76xx family has integrated DSA on the receiver channels and also supports DSA equivalent functionality on the transmitter channels. Each receiver channel has one analog RF peak power detector and various digital power detectors to assist AGC control for receiver channels, and two RF overload detectors for device reliability protection. The AFE76xx family has 8 of JESD204B compatible SerDes transceivers running up to 15 Gbps. The devices have up to two DUCs per TX channel and two DDCs per RX channel, with multiple interpolation/decimation rates and digital quadrature modulators/demodulators with independent, frequency flexible NCOs. The devices support more than 1000 MHz (800 MHz as 4T4R) RF signal bandwidth in single-band mode, and up to 800 MHz (300 MHz as 4T4R) RF signal bandwidth per band in dual-band mode. A low jitter PLL/VCO simplifies the sampling clock generation by allowing use of a lower frequency reference clock.

Weitere Informationen anfordern
Weitere Informationen finden Sie im vollständigen Datenblatt und in anderen Designressourcen für den kommerziellen, drahtlosspezifischen AFE7686. Jetzt anfordern
Für alle anderen Anwendungen sehen Sie sich unsere universalen HF-Abtast-AFEs an.
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | AFE76xx Quad/dual-channel, RF sampling analog front-end with 14-bit 9GSPS DACs and 14-bit 3GSPS ADCs datasheet (Rev. E) | PDF | HTML | 01 Mär 2019 |
Application note | MIMO Transceiver with AFE76xx for LTE and 5G Wireless Radio (Rev. A) | 02 Sep 2021 | ||
Application note | Temp Profile to Maintain Optimum FIT Performance | 23 Jul 2019 | ||
Application note | RF Sampling for Multi-band Radios | 26 Nov 2018 | ||
Application note | Small Cell and Repeater System Using Integrated RF Sampling Device | 12 Nov 2018 | ||
Application note | AFE76xx as a Single-Chip Wideband Repeater Using Loopback Mode | 01 Nov 2018 | ||
Application note | Dither Improves ACPR in RF Sampling DAC | 24 Okt 2018 | ||
Application note | Modular Communications Transceiver for 4G/5G Distributed Antenna | 18 Aug 2018 | ||
Application note | AFE768x Power Dissipation Comparison across Modes | 25 Jul 2018 | ||
EVM User's guide | AFE76xx Evaluation Module User's Guide | 16 Mär 2018 | ||
Application note | An Efficient LDO-less Power Supply Solution for AFE76xx | 13 Nov 2017 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
TI204C-IP — Request for JESD204 rapid design IP
The JESD204 rapid design IP has been designed to enable FPGA engineers to achieve an accelerated path to a working JESD204 system. The IP has been architected in a way that downstream digital processing and other application logic are isolated from most of the performance- and timing-critical (...)
Unterstützte Produkte und Hardware
Produkte
Highspeed-DACs (> 10 MSPSS)
Highspeed-ADCs (≥ 10 MSPS)
HF-Transceiver
HF-Transmitter
DATACONVERTERPRO-SW — High Speed Data Converter Pro GUI Installer, v5.31
This high-speed data converter pro GUI is a PC (Windows® XP/7/10 compatible) program designed to aid in evaluation of most TI high-speed data converter [analog-to-digital converter (ADC) and digital-to-analog converter (DAC)] and analog front-end (AFE) platforms. Designed to support the entire (...)
Unterstützte Produkte und Hardware
Produkte
Highspeed-DACs (> 10 MSPSS)
Highspeed-ADCs (≥ 10 MSPS)
Ultraschall-AFEs
HF-Transceiver
HF-Receiver
HF-Transmitter
Hardware-Entwicklung
Evaluierungsplatine
Software
Support-Software
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
FCBGA (ABJ) | 400 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.