Home Batteriemanagement-ICs Batterielader-ICs
Home
Batteriemanagement-ICs
Batterielader-ICs

BQ25190

AKTIV

Linearer Batterielader für I²C 1 Zellen 1 A mit integriertem Abwärts/Aufwärtswandler, DVS-Abwärtswan

Jetzt bestellen
Datenblatt

BQ25190

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 1 Features BAT temp thermistor monitoring (JEITA profile), Boost/Buck-Boost, Buck, IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Vin (max) (V) 25 Absolute max Vin (max) (V) 25 Control topology Linear Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Control interface I2C Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 1 Features BAT temp thermistor monitoring (JEITA profile), Boost/Buck-Boost, Buck, IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Vin (max) (V) 25 Absolute max Vin (max) (V) 25 Control topology Linear Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Control interface I2C Operating temperature range (°C) -40 to 85
DSBGA (YBG) 30 5.46 mm² 2.6 x 2.1
  • Integrated 1A power path linear battery charger
    • 3.0V to 18.0V input voltage operating range
    • Input voltage up to 25V tolerant
    • Configurable battery regulation voltage with ±0.5% accuracy from 3.5V to 4.65V in 10mV steps
    • 5mA to 1A configurable fast charge current
    • 55mΩ BATFET on-resistance
    • Up to 2.5A discharge current to support high system loads
    • Fully programmable JEITA profile for safe charging over temperature
  • Power path management for powering the system and charging the battery
    • Regulated system voltage ranging from 4.4V to 4.9V in addition to battery voltage tracking and input pass-through options
    • Configurable input current limit
    • Dynamic power path management optimizes charging from weak adapters
    • Selectable adapter or battery for system power
    • Advanced system reset mechanisms
  • Ultra-low quiescent current modes
    • 2µA battery quiescent current in battery mode
    • 15nA battery quiescent current in ship mode
  • Integrated Buck converter with I2C and GPIO programmable DVS output
    • 0.36µA quiescent current from system
    • 0.4V to 1.575V output voltage in 12.5mV steps or 0.4V to 3.6V output voltage in 25mV/50mV steps
    • Up to 600mA output current
  • Integrated Buck-boost converter with I2C programmable DVS output
    • 0.1µA quiescent current from system
    • 1.7V to 5.2V output voltage in 50mV steps
    • Up to 600mA output current for VSYS ≥ 3.0V, VBBOUT = 3.3V
  • Integrated I2C programmable LDOs (LDO1 and LDO2)
    • 25nA quiescent current
    • 0.8V to 3.6V output voltage in 50mV steps
    • Up to 200mA output current
    • LDO1 capabal of remaining on in Ship mode
    • Configurable LDO or Bypass mode
    • Dedicated input pins
  • Integrated fault protection for safety
    • Input current limit and overvoltage protection
    • Battery, integrated rail overcurrent protection
    • Battery depletion protection
    • Thermal regulation and thermal shutdown
  • Integrated 12-bit ADC to monitor input current, BATFET current, input voltage, battery voltage, battery temperature or external voltage signals
  • Integrated 1A power path linear battery charger
    • 3.0V to 18.0V input voltage operating range
    • Input voltage up to 25V tolerant
    • Configurable battery regulation voltage with ±0.5% accuracy from 3.5V to 4.65V in 10mV steps
    • 5mA to 1A configurable fast charge current
    • 55mΩ BATFET on-resistance
    • Up to 2.5A discharge current to support high system loads
    • Fully programmable JEITA profile for safe charging over temperature
  • Power path management for powering the system and charging the battery
    • Regulated system voltage ranging from 4.4V to 4.9V in addition to battery voltage tracking and input pass-through options
    • Configurable input current limit
    • Dynamic power path management optimizes charging from weak adapters
    • Selectable adapter or battery for system power
    • Advanced system reset mechanisms
  • Ultra-low quiescent current modes
    • 2µA battery quiescent current in battery mode
    • 15nA battery quiescent current in ship mode
  • Integrated Buck converter with I2C and GPIO programmable DVS output
    • 0.36µA quiescent current from system
    • 0.4V to 1.575V output voltage in 12.5mV steps or 0.4V to 3.6V output voltage in 25mV/50mV steps
    • Up to 600mA output current
  • Integrated Buck-boost converter with I2C programmable DVS output
    • 0.1µA quiescent current from system
    • 1.7V to 5.2V output voltage in 50mV steps
    • Up to 600mA output current for VSYS ≥ 3.0V, VBBOUT = 3.3V
  • Integrated I2C programmable LDOs (LDO1 and LDO2)
    • 25nA quiescent current
    • 0.8V to 3.6V output voltage in 50mV steps
    • Up to 200mA output current
    • LDO1 capabal of remaining on in Ship mode
    • Configurable LDO or Bypass mode
    • Dedicated input pins
  • Integrated fault protection for safety
    • Input current limit and overvoltage protection
    • Battery, integrated rail overcurrent protection
    • Battery depletion protection
    • Thermal regulation and thermal shutdown
  • Integrated 12-bit ADC to monitor input current, BATFET current, input voltage, battery voltage, battery temperature or external voltage signals

The BQ25190 is a highly integrated battery management unit that integrates the most commonly used functions for wearable devices: a linear charger with power path, one step-down switching converter (Buck), one buck-boost switching converter (Buck-boost), two LDOs (LDO1 and LDO2), manual reset with timer (MR) , multi-channel analog-to-digital converter (ADC), as well as four multifunctional general-purpose input/outputs (GPIO).

The integrated charger supports charge current from 5mA to 1A that enables quick and accurate charging while providing a regulated voltage to the system. The regulated system voltage (VSYS) can be configured through I2C based on the recommended operating conditions of the downstream system loads. Other operation parameters such as the input current limit, charge current, Buck converters’ output voltages, Buck-boost converters’ output voltage, and LDOs’ output voltages are also programmable through the I2C interface.

The BQ25190 features low quiescent current during operation and shutdown, which enables longer battery life.

The BQ25190 is a highly integrated battery management unit that integrates the most commonly used functions for wearable devices: a linear charger with power path, one step-down switching converter (Buck), one buck-boost switching converter (Buck-boost), two LDOs (LDO1 and LDO2), manual reset with timer (MR) , multi-channel analog-to-digital converter (ADC), as well as four multifunctional general-purpose input/outputs (GPIO).

The integrated charger supports charge current from 5mA to 1A that enables quick and accurate charging while providing a regulated voltage to the system. The regulated system voltage (VSYS) can be configured through I2C based on the recommended operating conditions of the downstream system loads. Other operation parameters such as the input current limit, charge current, Buck converters’ output voltages, Buck-boost converters’ output voltage, and LDOs’ output voltages are also programmable through the I2C interface.

The BQ25190 features low quiescent current during operation and shutdown, which enables longer battery life.

filter Andere Batterielader-ICs suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet BQ25190 I2 C Controlled 1-Cell, 1A, Linear Battery Charger with Integrated Buck-Boost, DVS Buck, LDOs, ADC, and Power Path datasheet (Rev. A) PDF | HTML 20 Dez 2024
Application note Small Form Factor Design for BQ25190 PDF | HTML 23 Sep 2025
Certificate BQ25190EVM EU Declaration of Conformity (DoC) 07 Aug 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

BQ25190EVM — BQ25190 – Evaluierungsmodul

Das BQ25190EVM ist ein Evaluierungsmodul für den Batterielademanagement-IC BQ25190. Der BQ25190 integriert die gängigsten Funktionen für Wearable-Geräte: Lineares Ladegerät, geregelter Ausgang, manuelle Rücksetzung mit Zeitschaltuhr und Transportmodus-Funktion.
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
DSBGA (YBG) 30 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos