Home Batteriemanagement-ICs Batterielader-ICs
Home
Batteriemanagement-ICs
Batterielader-ICs
NEU

BQ25640

AKTIV

I²C-gesteuertes 5-A-Abwärts-Akkuladegerät mit 1 Zelle, 18 V max. Eingangsspannung, Type-C-Erkennung

Jetzt bestellen
Datenblatt

BQ25640

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 5 Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Moisture detection, Power Path, USB C/PD compatible, USB OTG integrated, USB Type-C detection, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Vin (max) (V) 18 Absolute max Vin (max) (V) 26 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.8 Control interface I2C Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Charge current (max) (A) 5 Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Moisture detection, Power Path, USB C/PD compatible, USB OTG integrated, USB Type-C detection, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Vin (max) (V) 18 Absolute max Vin (max) (V) 26 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.8 Control interface I2C Operating temperature range (°C) -40 to 85
WQFN-FCRLF (VDL) 23 8.75 mm² 3.5 x 2.5
  • High-efficiency 5A, 1.5MHz, synchronous switch mode buck charger for single cell battery
    • >90% efficiency down to 10mA output current from 5V input
    • Charge current up to 5A in 20mA steps
    • Charge termination from 30 to 1000mA in 10mA steps
    • Highly configurable JEITA profile for safe charging over temperature
  • Fully Integrated CC Controller with Dual Role Power (DRP), Try.SNK and Try.SRC
  • BATFET control to support shutdown, ship mode and full system reset
    • 1.5µA quiescent current in battery only mode
    • 0.15µA battery leakage current in ship mode
    • 0.1µA battery leakage current in shutdown mode
  • Supports USB On-The-Go (OTG) and SRC mode
    • Reverse mode with 3.84V to 9.6V output
    • Programmable current limit up to 3.2A
  • Supports a wide range of input sources
    • 3.9V to 18V input operating voltage range with 26V absolute max input voltage
    • Supports USB Type-C inputs, USB BC1.2, HVDCP, and Non-Standard Adapters
    • Supports IINDPM Range from 10mA to 3.2A
    • API (Alternate Power from Input) mode for low power input sources down to 10mA
    • VINDPM automatically tracks battery voltage
    • Input Current Optimizer (ICO) maximizes input power without overloading adapters
  • Efficient battery operation with 7mΩ BATFET
  • Narrow VDC (NVDC) power path management
    • System instant-on with depleted or no battery
    • Battery supplement when adapter is fully loaded
  • Flexible autonomous or I2C-controlled modes
  • Integrated 12-bit ADC for voltage, current, and temperature monitoring
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±5% charge current regulation
    • ±5% input current regulation
  • Safety
    • Liquid detection and corrosion mitigation (Patent Pending)
    • Thermal regulation and thermal shutdown
    • Input/system/battery overvoltage and overcurrent protection
    • Charging safety timer
  • High-efficiency 5A, 1.5MHz, synchronous switch mode buck charger for single cell battery
    • >90% efficiency down to 10mA output current from 5V input
    • Charge current up to 5A in 20mA steps
    • Charge termination from 30 to 1000mA in 10mA steps
    • Highly configurable JEITA profile for safe charging over temperature
  • Fully Integrated CC Controller with Dual Role Power (DRP), Try.SNK and Try.SRC
  • BATFET control to support shutdown, ship mode and full system reset
    • 1.5µA quiescent current in battery only mode
    • 0.15µA battery leakage current in ship mode
    • 0.1µA battery leakage current in shutdown mode
  • Supports USB On-The-Go (OTG) and SRC mode
    • Reverse mode with 3.84V to 9.6V output
    • Programmable current limit up to 3.2A
  • Supports a wide range of input sources
    • 3.9V to 18V input operating voltage range with 26V absolute max input voltage
    • Supports USB Type-C inputs, USB BC1.2, HVDCP, and Non-Standard Adapters
    • Supports IINDPM Range from 10mA to 3.2A
    • API (Alternate Power from Input) mode for low power input sources down to 10mA
    • VINDPM automatically tracks battery voltage
    • Input Current Optimizer (ICO) maximizes input power without overloading adapters
  • Efficient battery operation with 7mΩ BATFET
  • Narrow VDC (NVDC) power path management
    • System instant-on with depleted or no battery
    • Battery supplement when adapter is fully loaded
  • Flexible autonomous or I2C-controlled modes
  • Integrated 12-bit ADC for voltage, current, and temperature monitoring
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±5% charge current regulation
    • ±5% input current regulation
  • Safety
    • Liquid detection and corrosion mitigation (Patent Pending)
    • Thermal regulation and thermal shutdown
    • Input/system/battery overvoltage and overcurrent protection
    • Charging safety timer

The BQ25640 is a highly-integrated 5A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer batteries. The design is highly integrated with built-in current sensing, loop compensation, input reverse-blocking FET (Q1), switching FETs (Q2 and Q3), and battery FET (Q4) between system and battery. The device integrates a USB Type-C controller with Dual-Role Power with Try.SNK and Try.SRC support. The BQ25640 uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. The low impedance power path optimizes efficiency, reduces battery charging time and extends battery life during discharging phase, and the ultra-low 0.15µA ship mode current extends battery shelf life.

The BQ25640 is a highly-integrated 5A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer batteries. The design is highly integrated with built-in current sensing, loop compensation, input reverse-blocking FET (Q1), switching FETs (Q2 and Q3), and battery FET (Q4) between system and battery. The device integrates a USB Type-C controller with Dual-Role Power with Try.SNK and Try.SRC support. The BQ25640 uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. The low impedance power path optimizes efficiency, reduces battery charging time and extends battery life during discharging phase, and the ultra-low 0.15µA ship mode current extends battery shelf life.
filter Andere Batterielader-ICs suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet BQ25640 I2 C Controlled Single Cell 5A Buck Charger with USB-C Detection datasheet PDF | HTML 06 Mär 2026
EVM User's guide BQ25640 Evaluation Module PDF | HTML 09 Mär 2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN-FCRLF (VDL) 23 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos