DAC39RF10EF
16 Bit, 2-Kanal, 20,48-GSPS 12-GHz-HF-Digital-Analog-Wandler, Eingangsrate begrenzt
DAC39RF10EF
- 10.24/20.48GSPS, multi-Nyquist DAC Cores
- Maximum input data rate vs DAC resolution:
- 16-bit: 1.22GSPS complex
- 11-bit: 3.41GSPS complex
- 9-bit, Single channel, DES mode: 15.12GSPS
- 8-bit, Single channel, DES mode: 20.48GSPS
- 9-bit, Dual channel: 7.56GSPS/ch
- 8-bit, Dual channel, 10.24GSPS/ch
- Output bandwidth (–3dB): 12GHz
- Performance at fOUT = 2.997 GHz, DES2XL mode, DEM/Dither on
- Noise floor (small signal): –150dBFS/Hz
- SFDR (–0.1dBFS) : 77dBc
- IMD3 (–7dBFS each tone) : –69dBc
- Four Integrated digital up-converters (DUC)
- Interpolation: 1x, 2x, 3x, 4x, 6x, 8x, 12x ... 256x
- Complex baseband DUC for I/Q output
- Complex to real up conversion for dual channel direct RF sampling
- 64-bit frequency resolution NCOs
- Fast reconfiguration interface for fast frequency hopping
- 4-bit data with 200MHz clock
- 60 ns reconfiguration (32-bit frequency)
- Any frequency hopping with phase coherence
- JESD204C Interface
- Up to 16 Lanes at up to 12.8Gbps
- Class C-S, subclass-1 compatible
- Internal AC coupling capacitors
- SYSREF Windowing for automatic SYSREF timing calibration
The DAC39RF10EF and RFS10EF are a family of dual and single channel digital-to-analog converters (DAC) with 16-bit resolution. The devices can be used as non-interpolating or interpolating DACs for either direct RF sampling or complex baseband signal generation. The maximum input data rate is 20.48GSPS for a single channel or 10.24GSPS for two channels. The device can generate signals of up to 10, 2.73 or 1GHz signal bandwidth (8, 11, and 16-bit input resolution) at carrier frequencies exceeding 8GHz enabling direct sampling through C-band and into X-band.
The high sampling rate, output frequency range, 64-bit NCO frequency resolution and any frequency hopping with phase coherence also makes DAC39RF10EF and RFS10EF capable of arbitrary waveform generation (AWG) and direct digital synthesis (DDS).
A JESD204B and JESD204C compatible serial interface has 16 receiver pairs capable of up to 12.8Gbps. The interface is JESD204B and JESD204C subclass-1 compliant for deterministic latency and multi-device synchronization through the use of SYSREF.
Ähnliche Produkte, die für Sie interessant sein könnten
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | DAC39RF10EF DAC39RFS10EF 10.24, 20.48GSPS, Dual and Single Channel, Multi-Nyquist Digital-to-Analog Converter (DAC) with JESD204B,C Interface datasheet (Rev. A) | PDF | HTML | 08 Mär 2024 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
DAC39RF10EVM — DAC39RF10-Evaluierungsmodul
DAC39RF10EVM ist eine Evaluierungsplatine für die Evaluierung der Digital-Analog-Wandler (DAC) DAC39RF10 von Texas Instruments. DAC39RF10 ist ein zweikanaliger 16/8-Bit-DAC. DAC39RF10 ist eine Familie von Ein- und Zweikanal-Digital-Analog-Wandlern (DAC) mit 16-Bit Auflösung. Die Bausteine können (...)
PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
FCBGA (ACK) | 256 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.