LM2673

AKTIV

Abwärtswandler (Buck) SIMPLE SWITCHER®, 8 bis 40 V, 3 A, mit einstellbar Strombegrenzung

Jetzt bestellen

Datenblatt

document-pdfAcrobat LM2673 SIMPLE SWITCHER® 3-A Step-Down Voltage Regulator With Adjustable Current Limit datasheet (Rev. O) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.

LMR51430

AKTIV

SIMPLE SWITCHER® mit 4,5 V bis 36 V, synchroner 3-A-Abwärtswandler mit 40-μA-IQ New converter in SOT-23 package

TLVM13630

AKTIV

Kompaktes 3-A-Abwärtswandler-Leistungsmodul für 3 V bis 36 V Eingangsspannung und 1 V bis 6 V Ausgan Save board space, simplify design and speed time to market with an integrated-inductor power module.

LM2673

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Topology

Buck

Iout (max) (A)

3

Vin (max) (V)

40

Vin (min) (V)

8

Vout (max) (V)

37

Vout (min) (V)

1.23

Features

Enable, Overcurrent protection

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.0042

Duty cycle (max) (%)

91

Rating

Catalog

Topology

Buck

Iout (max) (A)

3

Vin (max) (V)

40

Vin (min) (V)

8

Vout (max) (V)

37

Vout (min) (V)

1.23

Features

Enable, Overcurrent protection

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.0042

Duty cycle (max) (%)

91

VSON (NHM)

14

30 mm² (6 mm × 5 mm)

TO-220 (NDZ)

7

82.6008 mm² (10.16 mm × 8.13 mm)

TO-263 (KTW)

7

153.924 mm² (10.1 mm × 15.24 mm)

Efficiency Up to 94%
Simple and Easy to Design With (Using Off-The-
Shelf External Components)
Resistor Programmable Peak Current Limit Over a
Range of 2 A to 5 A
150-mΩ DMOS Output Switch
3.3-V, 5-V, 12-V Fixed Output and Adjustable
(1.2 V to 37 V) Versions
±2% Maximum Output Tolerance Over Full Line
and Load Conditions
Wide Input Voltage Range: 8 V to 40 V
260-KHz Fixed Frequency Internal Oscillator
Soft-Start Capability
–40 to 125°C Operating Junction Temperature
Range

Efficiency Up to 94%
Simple and Easy to Design With (Using Off-The-
Shelf External Components)
Resistor Programmable Peak Current Limit Over a
Range of 2 A to 5 A
150-mΩ DMOS Output Switch
3.3-V, 5-V, 12-V Fixed Output and Adjustable
(1.2 V to 37 V) Versions
±2% Maximum Output Tolerance Over Full Line
and Load Conditions
Wide Input Voltage Range: 8 V to 40 V
260-KHz Fixed Frequency Internal Oscillator
Soft-Start Capability
–40 to 125°C Operating Junction Temperature
Range

The LM2673 series of regulators are monolithic integrated circuits which provide all of the active functions for a step-down (buck) switching regulator capable of driving up to 3-A loads with excellent line and load regulation characteristics. High efficiency (>90%) is obtained through the use of a low ON-resistance DMOS power switch. The series consists of fixed output voltages of 3.3 V, 5 V, and 12 V and an adjustable output version.

The SIMPLE SWITCHER^® concept provides for a complete design using a minimum number of external components. A high fixed frequency oscillator (260 kHz) allows the use of physically smaller sized components. A family of standard inductors for use with the LM2673 are available from several manufacturers to greatly simplify the design process.

Other features include the ability to reduce the input surge current at power on by adding a soft-start timing capacitor to gradually turn on the regulator. The LM2673 series also has built-in thermal shutdown and resistor programmable current limit of the power MOSFET switch to protect the device and load circuitry under fault conditions. The output voltage is ensured to a ±2% tolerance. The clock frequency is controlled to within a ±11% tolerance.

The LM2673 series of regulators are monolithic integrated circuits which provide all of the active functions for a step-down (buck) switching regulator capable of driving up to 3-A loads with excellent line and load regulation characteristics. High efficiency (>90%) is obtained through the use of a low ON-resistance DMOS power switch. The series consists of fixed output voltages of 3.3 V, 5 V, and 12 V and an adjustable output version.

The SIMPLE SWITCHER^® concept provides for a complete design using a minimum number of external components. A high fixed frequency oscillator (260 kHz) allows the use of physically smaller sized components. A family of standard inductors for use with the LM2673 are available from several manufacturers to greatly simplify the design process.

Other features include the ability to reduce the input surge current at power on by adding a soft-start timing capacitor to gradually turn on the regulator. The LM2673 series also has built-in thermal shutdown and resistor programmable current limit of the power MOSFET switch to protect the device and load circuitry under fault conditions. The output voltage is ensured to a ±2% tolerance. The clock frequency is controlled to within a ±11% tolerance.

filter

Andere DC/DC-Wandler suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 20

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	LM2673 SIMPLE SWITCHER® 3-A Step-Down Voltage Regulator With Adjustable Current Limit datasheet (Rev. O)	PDF \| HTML	30.06.2016
	Anwendungshinweis	Semiconductor and IC Package Thermal Metrics (Rev. D)	PDF \| HTML	25.03.2024
	Technischer Artikel	DC/DC converter datasheets - Calculate system losses	PDF \| HTML	02.05.2016
	Technischer Artikel	DC/DC converter datasheets – System losses demystified	PDF \| HTML	25.04.2016
	Technischer Artikel	DC/DC converter datasheets – System efficiency demystified	PDF \| HTML	18.04.2016
	Anwendungshinweis	Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)		12.09.2014
	Anwendungshinweis	AN-1187 Leadless Leadframe Package (LLP) (Rev. R)		07.05.2013
	Anwendungshinweis	AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)		24.04.2013
	Anwendungshinweis	AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)		23.04.2013
	Anwendungshinweis	AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)		23.04.2013
	Anwendungshinweis	AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)		23.04.2013
	Anwendungshinweis	AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)		23.04.2013
	Anwendungshinweis	AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)		23.04.2013
	Anwendungshinweis	AN-1197 Selecting Inductors for Buck Converters (Rev. B)		23.04.2013
	Anwendungshinweis	AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)		23.04.2013
	Anwendungshinweis	AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)		23.04.2013
	Anwendungshinweis	Simple Techniques Minimize Cross-Coupling in Distributed Power Systems		21.03.2007
	Anwendungshinweis	Input and Output Capacitor Selection		19.09.2005
	Weitere Dokumente	SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations		12.07.2005
	Anwendungshinweis	AN-643 EMI/RFI Board Design (Rev. B)		03.05.2004

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine