All trademarks are the property of their respective owners.
The LM134/LM234/LM334 are 3-terminal adjustable current sources featuring 10,000:1 range in operating current, excellent current regulation and a wide dynamic voltage range of 1V to 40V. Current is established with one external resistor and no other parts are required. Initial current accuracy is ±3%. The LM134/LM234/LM334 are true floating current sources with no separate power supply connections. In addition, reverse applied voltages of up to 20V will draw only a few dozen microamperes of current, allowing the devices to act as both a rectifier and current source in AC applications.
The sense voltage used to establish operating current in the LM134 is 64mV at 25°C and is directly proportional to absolute temperature (°K). The simplest one external resistor connection, then, generates a current with ≈+0.33%/°C temperature dependence. Zero drift operation can be obtained by adding one extra resistor and a diode.
Applications for the current sources include bias networks, surge protection, low power reference, ramp generation, LED driver, and temperature sensing. The LM234-3 and LM234-6 are specified as true temperature sensors with ensured initial accuracy of ±3°C and ±6°C, respectively. These devices are ideal in remote sense applications because series resistance in long wire runs does not affect accuracy. In addition, only 2 wires are required.
The LM134 is specified over a temperature range of −55°C to +125°C, the LM234 from −25°C to +100°C and the LM334 from 0°C to +70°C. These devices are available in TO hermetic, TO-92 and SOIC-8 plastic packages.
| Top-Dokumentation | Typ | Titel | Format-Optionen | Neueste englische Version herunterladen | Datum |
|---|---|---|---|---|---|
| * | Datenblatt | LM134/LM234/LM334 3-Terminal Adjustable Current Sources datasheet (Rev. E) | 20.06.2013 | ||
| Anwendungshinweis | Precision Current Sources and Sinks Using Voltage References (Rev. A) | PDF | HTML | 15.04.2026 | ||
| E-book | Tips and tricks for designing with voltage references (Rev. A) | 07.05.2021 | |||
| E-book | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 28.06.2019 | |||
| Anwendungshinweis | AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B) | 06.05.2013 | |||
| Anwendungshinweis | AN-240 Wide-Range Current-to-Frequency Converters (Rev. B) | 29.04.2013 | |||
| Anwendungshinweis | AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B) | 23.04.2013 | |||
| Anwendungshinweis | TO-92 Packing Options / Ordering Instructions (Rev. A) | 23.06.2010 | |||
| Anwendungshinweis | Applying a New Precision Op Amp | 04.10.2004 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
Mit diesem Schnellstart-Rechner für externe Widerstände können Sie auf einfache Weise gültige externe Widerstandswerte relativ zur Spannungsreferenz, zur Stromversorgung und zu Laststromgrenzwerten berechnen. Mit diesen Eingaben können Sie sofort die Ergebnisse der Berechnungen anzeigen und anhand (...)
TIDA-00500 is a reference design to provide power to load for short duration of time after a power interrupt has occurred. Traditionally Programmable Logic Controllers (PLCs) are equipped with a recharge battery source for alternative power. This battery source often suffers from drawbacks like (...)
| Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| WAFERSALE (YS) | — | Ultra Librarian |
| TO-92 (LP) | 3 | Ultra Librarian |
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.