Produktdetails

Output power (W) 0.053 Analog supply (min) (V) 2 Analog supply voltage (max) (V) 4 Load (min) (Ω) 16 PSRR (dB) 82 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control Yes Shutdown current (ISD) (µA) 0.1 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 1.5
Output power (W) 0.053 Analog supply (min) (V) 2 Analog supply voltage (max) (V) 4 Load (min) (Ω) 16 PSRR (dB) 82 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control Yes Shutdown current (ISD) (µA) 0.1 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 1.5
DSBGA (YZR) 16 5.0625 mm² 2.25 x 2.25
  • Ground Referenced Outputs
  • Differential Inputs
  • I2C Volume and Mode Controls
  • Available in Space-Saving DSBGA Package
  • Ultra Low Current Shutdown Mode
  • Advanced Output Transient Suppression Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.0V to 4.0V Operation (PVDD and SVDD)
  • 1.8 to 4.0V Operation (I2CVDD)
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required

Key Specifications

  • Improved PSRR at 217Hz: 82dB (typ)
  • Stereo Output Power at VDD = 3V, RL = 16Ω, THD+N = 1%: 52mW (typ)
  • Mono Output Power at VDD = 3V, RL = 16Ω, THD+N = 1%: 93mW (typ)
  • Shutdown current: 0.1μA (typ)

All trademarks are the property of their respective owners.

  • Ground Referenced Outputs
  • Differential Inputs
  • I2C Volume and Mode Controls
  • Available in Space-Saving DSBGA Package
  • Ultra Low Current Shutdown Mode
  • Advanced Output Transient Suppression Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • 2.0V to 4.0V Operation (PVDD and SVDD)
  • 1.8 to 4.0V Operation (I2CVDD)
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required

Key Specifications

  • Improved PSRR at 217Hz: 82dB (typ)
  • Stereo Output Power at VDD = 3V, RL = 16Ω, THD+N = 1%: 52mW (typ)
  • Mono Output Power at VDD = 3V, RL = 16Ω, THD+N = 1%: 93mW (typ)
  • Shutdown current: 0.1μA (typ)

All trademarks are the property of their respective owners.

With its directly-coupled output technology, the LM48821 is a variable gain audio power amplifier capable of delivering 52mWRMS per channel into a 16Ω single-ended load with less than 1% THD+N from a 3V power supply. The I2C volume control has a range of –76dB to 18dB.

The LM48821's Tru-GND technology utilizes advanced charge pump technology to generate the LM48821’s negative supply voltage. This eliminates the need for output-coupling capacitors typically used with single-ended loads.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM48821 does not require output coupling capacitors or bootstrap capacitors, and therefore, is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM48821 incorporates selectable low-power consumption shutdown and channel select modes.

The LM48821 contains advanced output transient suppression circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

With its directly-coupled output technology, the LM48821 is a variable gain audio power amplifier capable of delivering 52mWRMS per channel into a 16Ω single-ended load with less than 1% THD+N from a 3V power supply. The I2C volume control has a range of –76dB to 18dB.

The LM48821's Tru-GND technology utilizes advanced charge pump technology to generate the LM48821’s negative supply voltage. This eliminates the need for output-coupling capacitors typically used with single-ended loads.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM48821 does not require output coupling capacitors or bootstrap capacitors, and therefore, is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.

The LM48821 incorporates selectable low-power consumption shutdown and channel select modes.

The LM48821 contains advanced output transient suppression circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet Direct Coupled, Ultra Low Noise, 52mW Diff Input Stereo Hp Amp w/I2C Vol Cntrl datasheet (Rev. A) 03 Mai 2013
EVM User's guide AN-1589 LM48821 Evaluation Board User's Guide (Rev. A) 01 Mai 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Gehäuse Pins Herunterladen
DSBGA (YZR) 16 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos