Home Energiemanagement DC/DC-Schaltregler DC/DC-Controller
Home
Energiemanagement
DC/DC-Schaltregler
DC/DC-Controller

LM5088-Q1

AKTIV

Nicht synchroner Abwärtsregler im Strommodus, Automotive Grade, großer Vin-Bereich 4,5–75 V

Jetzt bestellen
Datenblatt

Eine neuere Version dieses Produkts ist verfügbar

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
LM5141-Q1 AKTIV Synchroner Abwärtscontroller mit breitem Eingangsspannungsbereich für die Automobilindustrie, 2,2 MH Optional spread spectrum for improved EMI.

LM5088-Q1

AKTIV
Jetzt bestellen

Produktdetails

Rating Automotive Topology Buck Iout (max) (A) 10 Vin (max) (V) 75 Vin (min) (V) 4.5 Vout (max) (V) 70 Vout (min) (V) 1.205 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization Duty cycle (max) (%) 100 Iq (typ) (A) 0.0038 Number of phases 1 Operating temperature range (°C) -40 to 125
Rating Automotive Topology Buck Iout (max) (A) 10 Vin (max) (V) 75 Vin (min) (V) 4.5 Vout (max) (V) 70 Vout (min) (V) 1.205 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization Duty cycle (max) (%) 100 Iq (typ) (A) 0.0038 Number of phases 1 Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 16 32 mm² (5 mm × 6.4 mm)
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C5
  • Emulated current mode control
  • Drives external high-side N-channel MOSFET
  • Ultra-wide input voltage range from 4.5 V to 75 V
  • Low IQ shutdown and standby modes
  • High duty cycle ratio feature for reduced dropout voltage
  • Spread spectrum EMI reduction (LM5088-1)
  • Hiccup timer for overload protection (LM5088-2)
  • Adjustable output voltage from 1.205 V with 1.5% feedback reference accuracy
  • Wide bandwidth error amplifier
  • Single resistor oscillator frequency setting
  • Oscillator synchronization capability
  • Programmable soft start
  • High voltage, low dropout bias regulator
  • Thermal shutdown protection
  • 16-pin HTSSOP package
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C5
  • Emulated current mode control
  • Drives external high-side N-channel MOSFET
  • Ultra-wide input voltage range from 4.5 V to 75 V
  • Low IQ shutdown and standby modes
  • High duty cycle ratio feature for reduced dropout voltage
  • Spread spectrum EMI reduction (LM5088-1)
  • Hiccup timer for overload protection (LM5088-2)
  • Adjustable output voltage from 1.205 V with 1.5% feedback reference accuracy
  • Wide bandwidth error amplifier
  • Single resistor oscillator frequency setting
  • Oscillator synchronization capability
  • Programmable soft start
  • High voltage, low dropout bias regulator
  • Thermal shutdown protection
  • 16-pin HTSSOP package

The LM5088 high voltage non-synchronous buck controller features all the necessary functions to implement an efficient, high-voltage buck converter using a minimum number of external components. The LM5088 can be configured to operate over an ultra-wide input voltage range of 4.5 V to 75 V. This easy-to-use controller includes a level-shifted gate driver capable of controlling an external N-channel buck switch. The control method is based upon peak current mode control utilizing an emulated current ramp. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage and low output voltage applications. The LM5088 switching frequency is programmable from 50 kHz to 1 MHz.

The LM5088 is available in two versions: The LM5088-1 provides a ±5% frequency dithering function to reduce the conducted and radiated EMI, while the LM5088-2 provides a versatile restart timer for overload protection. Additional features include a low dropout bias regulator, tri-level enable input to control shutdown and standby modes, soft start, and oscillator synchronization capability. The device is available in a thermally enhanced 16-pin HTSSOP package.

The LM5088 high voltage non-synchronous buck controller features all the necessary functions to implement an efficient, high-voltage buck converter using a minimum number of external components. The LM5088 can be configured to operate over an ultra-wide input voltage range of 4.5 V to 75 V. This easy-to-use controller includes a level-shifted gate driver capable of controlling an external N-channel buck switch. The control method is based upon peak current mode control utilizing an emulated current ramp. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage and low output voltage applications. The LM5088 switching frequency is programmable from 50 kHz to 1 MHz.

The LM5088 is available in two versions: The LM5088-1 provides a ±5% frequency dithering function to reduce the conducted and radiated EMI, while the LM5088-2 provides a versatile restart timer for overload protection. Additional features include a low dropout bias regulator, tri-level enable input to control shutdown and standby modes, soft start, and oscillator synchronization capability. The device is available in a thermally enhanced 16-pin HTSSOP package.
filter Andere DC/DC-Controller suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 10
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt LM5088, LM5088-Q1 Wide Input Range Non-Synchronous Buck Controller datasheet (Rev. J) PDF | HTML 08.06.2022
Whitepaper Valuing wide VIN, low EMI synchronous buck circuits for cost-driven, demanding a (Rev. A) 10.04.2019
Anwendungshinweis Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) 12.03.2019
Analog Design Journal Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics 21.07.2016
Anwendungshinweis Load Dump and Cranking Protection for Automotive Backlight LED Power Supply (Rev. A) 16.03.2015
Anwendungshinweis Create an Inverting Power Supply from a Step-Down Regulator (Rev. B) 26.10.2012
Anwendungshinweis Level Shifting Control for an Inverting Buck-boost 10.10.2012
Anwendungshinweis Improved Load Current Capability for Cap-Drop Off-Line Power Supply for E-Meter 27.10.2011
Anwendungshinweis Improve Power Converter Reliability Using Hiccup-Mode Current Limiting 11.05.2009
Analog Design Journal Using a buck converter in an inverting buck-boost topology 12.10.2007

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM5088MH-1EVAL — LM5088-1 – Evaluierungsmodul für nicht synchronen Abwärtsregler mit großem Eingangsbereich und Dithe

The LM5088-1 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the LM5088 controller IC. The LM5088 evaluation board is available in two versions (like the LM5088 controller): the LM5088-1 (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

LM5088MH-2EVAL — LM5088-2 – nicht synchroner Abwärtsregler mit großem Eingangsspannungsbereich und Hiccup-Modus-Neust

The LM5088-2 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the LM5088 controller IC. The LM5088 evaluation board is available in two versions (like the LM5088 controller): the LM5088-1 (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

LM5088 TINA-TI Transient Reference Design

SNVM022.TSC (136 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Simulationsmodell

LM5088 TINA-TI Transient Spice Model

SNVM021.ZIP (16 KB) - TINA-TI Spice-Modell
Unterstützte Produkte und Hardware
Berechnungstool

LM25088-5088QUICK-CALC — Lm(2)5088 Schnellstartrechner

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP) 16 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos