Startseite Energiemanagement DC/DC-Spannungsversorgungsmodul Stromversorgungsmodule (integrierter Induktor)

LMZM33606

AKTIV

Stromversorgungsmodul, 3,5 bis 36 V Eingang, 1 bis 20 V Ausgang, 6 A

Eine neuere Version dieses Produkts ist verfügbar

Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
TLVM13660 AKTIV 36-V-Eingang, 1-V- bis 6-V-Ausgang, 6-A-Abwärts-Stromversorgungsmodul in einem verbessertem 5-mm x 5 Basic feature set
TPSM63606 AKTIV Kompaktes 36-V-Eingang, 1-V- bis 16-V-Ausgang, 6-A-Abwärts-Stromversorgungsmodul in einem verbessert Significantly smaller footprint, lower EMI, higher efficiency, and optional spread spectrum.

Produktdetails

Rating Catalog Operating temperature range (°C) -40 to 105 Topology Buck, Inverting Buck-Boost, Synchronous Buck Type Module Iout (max) (A) 6 Vin (min) (V) 3.5 Vin (max) (V) 36 Vout (min) (V) 1 Vout (max) (V) 20 Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200 Features EMI Tested, Enable, Frequency synchronization, Light Load Efficiency, Power good, Tracking Control mode current mode Duty cycle (max) (%) 90
Rating Catalog Operating temperature range (°C) -40 to 105 Topology Buck, Inverting Buck-Boost, Synchronous Buck Type Module Iout (max) (A) 6 Vin (min) (V) 3.5 Vin (max) (V) 36 Vout (min) (V) 1 Vout (max) (V) 20 Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200 Features EMI Tested, Enable, Frequency synchronization, Light Load Efficiency, Power good, Tracking Control mode current mode Duty cycle (max) (%) 90
B3QFN (RLX) 41 160 mm² 16 x 10
  • Small Complete Solution Size: < 250 mm2
    • Requires as few as 4 External Components
    • 16 mm × 10 mm × 4 mm QFN Package
  • Supports 5-V, 12-V, 24-V, 28-V Input Rails
    • 1-V to 20-V Output Voltage Range
    • Pin Compatible with 4-A LMZM33604
  • Meets EN55011 Radiated Emissions
  • Configurable as Negative Output Voltage
  • Adjustable Features for Design Flexibility
    • Switching Frequency (350 kHz to 2.2 MHz)
    • Synchronization to an External Clock
    • Selectable Auto Mode or FPWM Mode
      • Auto: Boost Efficiency at Light Loads
      • FPWM: Fixed Frequency Over Entire Load
    • Adjustable Soft Start and Tracking Input
    • Precision Enable to Program System UVLO
  • Protection Features
    • Hiccup Mode Current Limit
    • Overtemperature Protection
    • Power-Good Output
  • Operate in Rugged Environments
    • Up to 50-W Output Power at 85°C, No Airflow
    • Operating Junction Range: –40°C to +125°C
    • Operating Ambient Range: –40°C to +105°C
    • Shock and Vibration Tested to Mil-STD-883D
  • Small Complete Solution Size: < 250 mm2
    • Requires as few as 4 External Components
    • 16 mm × 10 mm × 4 mm QFN Package
  • Supports 5-V, 12-V, 24-V, 28-V Input Rails
    • 1-V to 20-V Output Voltage Range
    • Pin Compatible with 4-A LMZM33604
  • Meets EN55011 Radiated Emissions
  • Configurable as Negative Output Voltage
  • Adjustable Features for Design Flexibility
    • Switching Frequency (350 kHz to 2.2 MHz)
    • Synchronization to an External Clock
    • Selectable Auto Mode or FPWM Mode
      • Auto: Boost Efficiency at Light Loads
      • FPWM: Fixed Frequency Over Entire Load
    • Adjustable Soft Start and Tracking Input
    • Precision Enable to Program System UVLO
  • Protection Features
    • Hiccup Mode Current Limit
    • Overtemperature Protection
    • Power-Good Output
  • Operate in Rugged Environments
    • Up to 50-W Output Power at 85°C, No Airflow
    • Operating Junction Range: –40°C to +125°C
    • Operating Ambient Range: –40°C to +105°C
    • Shock and Vibration Tested to Mil-STD-883D

The LMZM33606 power module is an easy-to-use integrated power solution that combines a 6-A DC/DC converter with power MOSFETs, a shielded inductor, and passives in a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and inductor part selection from the design process.

The 16 mm × 10 mm × 4 mm, 41-pin, QFN package is easy to solder onto a printed circuit board and allows a compact, low-profile point-of-load design. The LMZM33606 feature set includes power good, adjustable soft start, tracking, synchronization, programmable UVLO, prebias start-up, selectable auto or FPWM modes, as well as over-current and over-temperature protection. The LMZM33606 can be configured as negative output voltage for inverting applications.

The LMZM33606 power module is an easy-to-use integrated power solution that combines a 6-A DC/DC converter with power MOSFETs, a shielded inductor, and passives in a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and inductor part selection from the design process.

The 16 mm × 10 mm × 4 mm, 41-pin, QFN package is easy to solder onto a printed circuit board and allows a compact, low-profile point-of-load design. The LMZM33606 feature set includes power good, adjustable soft start, tracking, synchronization, programmable UVLO, prebias start-up, selectable auto or FPWM modes, as well as over-current and over-temperature protection. The LMZM33606 can be configured as negative output voltage for inverting applications.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 9
Typ Titel Datum
* Data sheet LMZM33606 3.5-V to 36-V Input, 1-V to 20-V Output, 6-A Power Module datasheet (Rev. B) PDF | HTML 24 Mai 2019
Application note Soldering Considerations for Power Modules (Rev. C) PDF | HTML 14 Mär 2024
Application note Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 26 Jul 2021
Application note Practical Thermal Design With DC/DC Power Modules (Rev. A) 20 Nov 2019
Application note Inverting Application Using the LMZM33606 (Rev. B) 17 Mai 2019
EVM User's guide LMZM33604EVM and LMZM33606EVM User's Guide (Rev. B) 10 Apr 2019
Application note Output Noise Filtering for DC/DC Power Modules 05 Mär 2019
White paper Power modules for lab instrumentation 18 Okt 2018
Technical article How to create a programmable output inverting buck-boost regulator PDF | HTML 17 Okt 2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LMZM33606EVM — 6-A-Stromversorgungsmodulevaluierungsboard, 3,5 bis 36 V Eingang, 1 bis 20 V Ausgang

The LMZM33606 evaluation board is configured to evaluate the operation of the LMZM33606 power module for current up to 6 A. The input voltage range is 3.5 V to 36 V. The output voltage range is 1 V to 20 V. The evaluation board makes it easy to evaluate the LMZM33606 operation.
Benutzerhandbuch: PDF
Simulationsmodell

LMZM33606 PSpice Transient Model (Rev. A)

SNVMBK2A.ZIP (114 KB) - PSpice Model
Simulationsmodell

LMZM33606 Unencrypted PSpice Transient Model (Rev. A)

SNVMBK3A.ZIP (8 KB) - PSpice Model
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
B3QFN (RLX) 41 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos