Produktdetails

Number of ADC channels 2 Analog inputs 2 Digital audio interface I2S, L, R Control interface H/W Sampling rate (max) (kHz) 48 ADC SNR (typ) (dB) 95 Rating Catalog Analog outputs 0 Operating temperature range (°C) to
Number of ADC channels 2 Analog inputs 2 Digital audio interface I2S, L, R Control interface H/W Sampling rate (max) (kHz) 48 ADC SNR (typ) (dB) 95 Rating Catalog Analog outputs 0 Operating temperature range (°C) to
SSOP (DB) 24 63.96 mm² 8.2 x 7.8
  • Dual 20-Bit Monolithic ΔΣ ADC
  • Single-Ended Voltage Input
  • 64× Oversampling Decimation Filter:
    • Pass-Band Ripple: ±0.05 dB
    • Stop-Band Attenuation: -65 dB
  • High Performance:
    • THD+N: -88 dB (typical)
    • SNR: 95 dB (typical)
    • Dynamic Range: 95 dB (typical)
    • Internal High-Pass Filter
  • PCM Audio Interface:
    • Master/Slave Modes
    • Four Data Formats
  • Sampling Rate: 4 kHz to 48 kHz
  • System Clock: 256 fS, 384 fS, or 512 fS
  • Single 5-V Power Supply
  • Small 24-Pin SSOP Package
  • APPLICATIONS
    • DVD Recorders
    • DVD Receivers
    • AV Amplifier Receivers
    • Electric Musical Instruments

System Two, Audio Precision are trademarks of Audio Precision, Inc.

  • Dual 20-Bit Monolithic ΔΣ ADC
  • Single-Ended Voltage Input
  • 64× Oversampling Decimation Filter:
    • Pass-Band Ripple: ±0.05 dB
    • Stop-Band Attenuation: -65 dB
  • High Performance:
    • THD+N: -88 dB (typical)
    • SNR: 95 dB (typical)
    • Dynamic Range: 95 dB (typical)
    • Internal High-Pass Filter
  • PCM Audio Interface:
    • Master/Slave Modes
    • Four Data Formats
  • Sampling Rate: 4 kHz to 48 kHz
  • System Clock: 256 fS, 384 fS, or 512 fS
  • Single 5-V Power Supply
  • Small 24-Pin SSOP Package
  • APPLICATIONS
    • DVD Recorders
    • DVD Receivers
    • AV Amplifier Receivers
    • Electric Musical Instruments

System Two, Audio Precision are trademarks of Audio Precision, Inc.

The PCM1800 is a low-cost, single-chip stereo analog-to-digital converter (ADC) with single-ended analog voltage inputs. The PCM1800 uses a delta-sigma modulator with 64 times oversampling, including a digital decimation filter and a serial interface which supports both master and slave modes and four data formats. The PCM1800 is suitable for a wide variety of cost-sensitive consumer applications where good performance is required.

The PCM1800 is fabricated using a highly advanced CMOS process and is available in a small 24-pin SSOP package.

The PCM1800 is a low-cost, single-chip stereo analog-to-digital converter (ADC) with single-ended analog voltage inputs. The PCM1800 uses a delta-sigma modulator with 64 times oversampling, including a digital decimation filter and a serial interface which supports both master and slave modes and four data formats. The PCM1800 is suitable for a wide variety of cost-sensitive consumer applications where good performance is required.

The PCM1800 is fabricated using a highly advanced CMOS process and is available in a small 24-pin SSOP package.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet Single-Ended Analog-Input 20-Bit Stereo ADC datasheet (Rev. B) 10 Jul 2007

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Gehäuse Pins Herunterladen
SSOP (DB) 24 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos