SN54LVC646A-SP

AKTIV

Radiation-tolerant, QML-V, Octal Bus Transceiver and Register With 3-State Outputs

Jetzt bestellen

Datenblatt

document-pdfAcrobat Rad-Tolerant Class V Octal Bus Transceiver and Register With 3-State Outputs datasheet (Englisch)

SN54LVC646A-SP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

8

IOL (max) (mA)

24

IOH (max) (mA)

-24

Input type

TTL/CMOS

Output type

LVTTL

Features

Balanced outputs, Over-voltage tolerant inputs, Partial power down (Ioff), Very high speed (tpd 5-10ns)

Technology family

LVC

Rating

Space

Operating temperature range (°C)

-55 to 125

Number of channels

8

IOL (max) (mA)

24

IOH (max) (mA)

-24

Input type

TTL/CMOS

Output type

LVTTL

Features

Balanced outputs, Over-voltage tolerant inputs, Partial power down (Ioff), Very high speed (tpd 5-10ns)

Technology family

LVC

Rating

Space

Operating temperature range (°C)

-55 to 125

CFP (W)

24

130.5324 mm² (— mm × — mm)

Operates From 1.65 V to 3.6 V
Inputs Accept Voltages to 5.5 V
Max t_pd of 7.4 ns at 3.3 V
Typical V_OLP (Output Ground Bounce)
<0.8 at V_CC = 3.3 V, T_A = 25°C
Typical V_OHV (Output V_OH Undershoot)
>2 V at V_CC = 3.3 V, T_A = 25°C
Supports Mixed-Mode Signal Operation on All Ports
(5-V Input/Output Voltage With 3.3-V V_CC)
I_off Supports Partial Power-Down-Mode Operation
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
Rad Tolerant: 50kRad (Si) TID⁽¹⁾
- TID Dose Rate 0.10 rad/s
QML-V Qualified, SMD 5962-97626

⁽¹⁾Radiation tolerance is a typical value based upon initial device qualification. Radiation Lot Acceptance Testing is available – contact factory for details.

Operates From 1.65 V to 3.6 V
Inputs Accept Voltages to 5.5 V
Max t_pd of 7.4 ns at 3.3 V
Typical V_OLP (Output Ground Bounce)
<0.8 at V_CC = 3.3 V, T_A = 25°C
Typical V_OHV (Output V_OH Undershoot)
>2 V at V_CC = 3.3 V, T_A = 25°C
Supports Mixed-Mode Signal Operation on All Ports
(5-V Input/Output Voltage With 3.3-V V_CC)
I_off Supports Partial Power-Down-Mode Operation
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
Rad Tolerant: 50kRad (Si) TID⁽¹⁾
- TID Dose Rate 0.10 rad/s
QML-V Qualified, SMD 5962-97626

⁽¹⁾Radiation tolerance is a typical value based upon initial device qualification. Radiation Lot Acceptance Testing is available – contact factory for details.

The SN54LVC646A octal bus transceiver and register is designed for 2.7-V to 3.6-V V_CC operation.

This device consists of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the A or B bus is clocked into the registers on the low-to-high transition of the appropriate clock (CLKAB or CLKBA) input. Figure 1 shows the four fundamental bus-management functions that are performed with the SN54LVC646A device.

Output-enable (OE) and direction-control (DIR) inputs control the transceiver functions. In the transceiver mode, data present at the high-impedance port is stored in either register or in both.

The select-control (SAB and SBA) inputs can multiplex stored and real-time (transparent mode) data. DIR determines which bus receives data when OE is low. In the isolation mode (OE high), A data is stored in one register and B data can be stored in the other register.

When an output function is disabled, the input function still is enabled and can be used to store and transmit data. Only one of the two buses, A or B, can be driven at a time.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.