SN74ALVCH162601

AKTIV

Universal-Bustransceiver, 18 Bit, mit Tri-State-Ausgängen

Jetzt bestellen

Datenblatt

document-pdfAcrobat SN74ALVCH162601 datasheet (Rev. H) (Englisch)

SN74ALVCH162601

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

18

IOL (max) (mA)

12

IOH (max) (mA)

-32

Input type

TTL-Compatible CMOS

Output type

3-State

Features

Balanced outputs, Bus-hold, Damping resistors, Positive input clamp diode, Ultra high speed (tpd <5ns)

Technology family

ALVC

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of channels

18

IOL (max) (mA)

12

IOH (max) (mA)

-32

Input type

TTL-Compatible CMOS

Output type

3-State

Features

Balanced outputs, Bus-hold, Damping resistors, Positive input clamp diode, Ultra high speed (tpd <5ns)

Technology family

ALVC

Rating

Catalog

Operating temperature range (°C)

-40 to 85

TSSOP (DGG)

56

113.4 mm² (14 mm × 8.1 mm)

SSOP (DL)

56

190.647 mm² (18.42 mm × 10.35 mm)

Member of the Texas Instruments Widebus™ Family
EPIC™ (Enhanced-Performance Implanted CMOS) Submicron Process
UBT™ (Universal Bus Transceiver) Combines D-Type Latches and D-Type Flip-Flops for Operation in Transparent, Latched, Clocked, or Clock-Enabled Modes
B-Port Outputs Have Equivalent 26- Series Resistors, So No External Resistors Are Required
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 250 mA Per JESD 17
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Package Options Include Plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages

NOTE: For tape-and-reel order entry, the DGGR package is abbreviated to GR.

Widebus, EPIC, UBT are trademarks of Texas Instruments.

Member of the Texas Instruments Widebus™ Family
EPIC™ (Enhanced-Performance Implanted CMOS) Submicron Process
UBT™ (Universal Bus Transceiver) Combines D-Type Latches and D-Type Flip-Flops for Operation in Transparent, Latched, Clocked, or Clock-Enabled Modes
B-Port Outputs Have Equivalent 26- Series Resistors, So No External Resistors Are Required
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 250 mA Per JESD 17
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Package Options Include Plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages

NOTE: For tape-and-reel order entry, the DGGR package is abbreviated to GR.

Widebus, EPIC, UBT are trademarks of Texas Instruments.

This 18-bit universal bus transceiver is designed for 1.65-V to 3.6-V V_CC operation.

The SN74ALVCH162601 combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, clocked, and clock-enabled modes.

Data flow in each direction is controlled by output-enable (OEAB\ and OEBA\), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. The clock can be controlled by the clock-enable (CLKENAB\ and CLKENBA\) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. When OEAB\ is low, the outputs are active. When OEAB\ is high, the outputs are in the high-impedance state.

Data flow for B to A is similar to that of A to B, but uses OEBA\, LEBA, CLKBA, and CLKENBA\.

The B-port outputs include equivalent 26- series resistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN74ALVCH162601 is characterized for operation from –0°C to 85°C.