Startseite Audio Audiowandler Audio-CODECs
Startseite
Audio
Audiowandler
Audio-CODECs
NEU

TAC5112-Q1

VORSCHAU

Automotive low-power stereo audio codec with 102-dB dynamic range ADC, 106-dB DAC

Jetzt bestellen
Datenblatt

TAC5112-Q1

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface L, TDM Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 768 Rating Automotive Features Digital mic support, Headset detect, Low latency, Low power, Mic bias, Phase-locked loop (PLL), PowerTune, Single supply, Stereo headphone amplifier, Thermal Foldback ADC SNR (typ) (dB) 100 DAC SNR (typ) (dB) 106 Operating temperature range (°C) -40 to 125
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface L, TDM Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 768 Rating Automotive Features Digital mic support, Headset detect, Low latency, Low power, Mic bias, Phase-locked loop (PLL), PowerTune, Single supply, Stereo headphone amplifier, Thermal Foldback ADC SNR (typ) (dB) 100 DAC SNR (typ) (dB) 106 Operating temperature range (°C) -40 to 125
WQFN (RTV) 32 25 mm² 5 x 5
  • ADC channel
    • Stereo high performance ADC
    • Performance:
      • Line differential input dynamic range: 100dB
      • Mic differential input dynamic range: 100dB
      • THD+N: –95dB
      • Channel summing mode supports high SNR
    • Input voltage:
      • Differential, 2VRMS full-scale inputs
      • Single-ended, 1VRMS full-scale inputs
    • Input mix / mux options
    • Sample rate (fS) = 8kHz to 768kHz
    • Programmable microphone bias (Up to 3V)
  • DAC channel
    • Stereo high performance DAC
    • DAC performance:
      • DAC to line out dynamic range: 106dB
      • DAC to HP out dynamic range: 106dB
      • THD+N: –95 dB
    • Head phone / line Out output voltage:
      • Differential, 2VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample Rates (fs) = 8KHz to 768KHz
  • Common features
    • Up to 4 record channels
      • 2 Channel analog + 2 channel digital
      • 1 Channel analog + 3 channel digital
      • 4 Channel digital
    • Analog input to output by-pass
    • Voice activity detection
    • Battery protection
    • Signal distortion limiter
    • Thermal foldback
    • Low latency filter selection
    • Programmable HPF and biquad filters
    • I2C & SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or left justified
      • Word length: 16,20,24 or 32 bits
    • Programmable PLL for flexible clocking
    • Low power modes
      • TBD mW for playback
      • TBD mW for record
    • Single supply operation: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • ADC channel
    • Stereo high performance ADC
    • Performance:
      • Line differential input dynamic range: 100dB
      • Mic differential input dynamic range: 100dB
      • THD+N: –95dB
      • Channel summing mode supports high SNR
    • Input voltage:
      • Differential, 2VRMS full-scale inputs
      • Single-ended, 1VRMS full-scale inputs
    • Input mix / mux options
    • Sample rate (fS) = 8kHz to 768kHz
    • Programmable microphone bias (Up to 3V)
  • DAC channel
    • Stereo high performance DAC
    • DAC performance:
      • DAC to line out dynamic range: 106dB
      • DAC to HP out dynamic range: 106dB
      • THD+N: –95 dB
    • Head phone / line Out output voltage:
      • Differential, 2VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample Rates (fs) = 8KHz to 768KHz
  • Common features
    • Up to 4 record channels
      • 2 Channel analog + 2 channel digital
      • 1 Channel analog + 3 channel digital
      • 4 Channel digital
    • Analog input to output by-pass
    • Voice activity detection
    • Battery protection
    • Signal distortion limiter
    • Thermal foldback
    • Low latency filter selection
    • Programmable HPF and biquad filters
    • I2C & SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or left justified
      • Word length: 16,20,24 or 32 bits
    • Programmable PLL for flexible clocking
    • Low power modes
      • TBD mW for playback
      • TBD mW for record
    • Single supply operation: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C

The TAC5112-Q1 is a low power Stereo Codec with 2VRMS differential Input, 100dB Stereo ADC and 2VRMS Stereo DAC. The TAC5112-Q1 supports both differential and Single-ended input and output. The device supports both Microphone and Line In input on the ADC Channel. DAC Output can be configured for either Line Out or Head Phone Load. TAC5112-Q1 can drive up to 62.5mW into a Headphone Load. The TAC5112-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes, and allows for sample rates up to 768kHz. The TAC5112-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, makes TAC5112-Q1 an excellent choice for space-constrained audio applications.

The TAC5112-Q1 is a low power Stereo Codec with 2VRMS differential Input, 100dB Stereo ADC and 2VRMS Stereo DAC. The TAC5112-Q1 supports both differential and Single-ended input and output. The device supports both Microphone and Line In input on the ADC Channel. DAC Output can be configured for either Line Out or Head Phone Load. TAC5112-Q1 can drive up to 62.5mW into a Headphone Load. The TAC5112-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes, and allows for sample rates up to 768kHz. The TAC5112-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, makes TAC5112-Q1 an excellent choice for space-constrained audio applications.
open-in-new Andere Audio-CODECs suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet TAC5112-Q1 Low-power stereo audio codec with 100 dB dynamic range ADC and 106 dB dynamic range DAC datasheet PDF | HTML 21 Dez 2023
Application note Headset Detection for TAx52xx Family PDF | HTML 11 Apr 2024
Application note Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family PDF | HTML 08 Nov 2023
Application note Clock Error Configuration, Detection, and Modes Supported in TAx5x1x Family PDF | HTML 07 Nov 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TAC5112EVM-K — TAC5112 Stereo-CODEC – Evaluierungsmodul

Das TAC5112-Evaluierungsmodul (EVM) ermöglicht es dem Anwender, die Fähigkeiten des TAC5112 zu evaluieren. Der TAD5112 ist ein energieeffizienter Zwei-Kanal-Stereo-Codec, der für Anwendungen in den Bereichen Mobilfunk, IP-Telefonie oder professionelle Audioanwendungen vorgesehen ist. Das EVM wird (...)
Benutzerhandbuch: PDF | HTML
Anfordern
Anwendungssoftware und Frameworks

PUREPATHCONSOLE — PurePath™ Console – grafische Entwicklungssuite für Design und Entwicklung von Audiosystemen

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.
PurePath Console’s (...)
Anfordern
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins Herunterladen
WQFN (RTV) 32 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos