Gehäuseinformationen
| Gehäuse | Pins HTSSOP (DDW) | 44 |
| Betriebstemperaturbereich (°C) 0 to 70 |
| Gehäusemenge | Träger 35 | TUBE |
Merkmale von TAS5176
- Total Output Power at 10% THD+N
- 5 × 15 W at 8
(BTL)
- 5 × 15 W at 8
- 105-dB SNR (A-Weighted), with TAS5086 Modulator
- < 0.05% THD+N at 1 W
- Power Stage Efficiency > 90% Into Recommended Loads (SE)
- Integrated Self-Protection Circuits
- Undervoltage
- Overtemperature
- Overload
- Short Circuit
- Integrated Active-Bias Control to Avoid DC Pop
- Footprint Compatible with the TAS5186A for Scaleable Designs
- Thermally Enhanced 44-pin HTSSOP Package with PowerPad located on the bottom of the device
- EMI-Compliant When Used With Recommended System Design
- APPLICATIONS
- DVD Receiver
- Home Theater in a Box
- Televisions
PowerPAD, PurePath Digital are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
Beschreibung von TAS5176
The TAS5176 is a high-performance, six-channel, digital-amplifier power stage with an improved protection system. The TAS5176 is capable of driving a 8-, single-ended subwoofer greater than 25 W at 10% THD+N performance.
Furthermore, the TAS5176 can drive three-channels in BTL mode, with the same high-performance but with a higher power level. In BTL mode, the TAS5176 is capable of driving 8- loads to greater than 30 Watts at 10% THD+N performance.
A low-cost, high-fidelity audio system can be built using a TI chipset comprising a modulator (e.g., TAS5086) and the TAS5176. This device does not require power-up sequencing because of the internal power-on reset.
The TAS5176 requires only simple passive demodulation filters on its outputs to deliver high-quality, high-efficiency audio amplification. The efficiency of the TAS5176 is greater than 90% when driving 8- subwoofer speaker.
The TAS5176 has an innovative protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overload protection, undervoltage protection, and overtemperature protection. The TAS5176 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients. A new programmable overcurrent detector allows the use of lower-cost inductors in the demodulation output filter.