TLV5636

AKTIV

DAC mit seriellem Eingang, 12 Bit, 1 us, programmierbare Int. Ref., Einschwingzeit

Jetzt bestellen

Datenblatt

document-pdfAcrobat TLV5636 - 2.7-V To 5.5-V Low Power 12-Bit DAC With Internal Ref & Power Down datasheet (Rev. C) (Englisch)

TLV5636

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Resolution (Bits)

12

Number of DAC channels

1

Interface type

SPI

Output type

Buffered Voltage

Settling time (µs)

1

Reference type

Ext, Int

Architecture

String

Rating

Catalog

Output range (max) (mA/V)

5.1

Output range (min) (mA/V)

0

Sample/update rate (Msps)

0.233

Power consumption (typ) (mW)

4.5

Operating temperature range (°C)

-40 to 85

Resolution (Bits)

12

Number of DAC channels

1

Interface type

SPI

Output type

Buffered Voltage

Settling time (µs)

1

Reference type

Ext, Int

Architecture

String

Rating

Catalog

Output range (max) (mA/V)

5.1

Output range (min) (mA/V)

0

Sample/update rate (Msps)

0.233

Power consumption (typ) (mW)

4.5

Operating temperature range (°C)

-40 to 85

SOIC (D)

8

29.4 mm² 4.9 x 6

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

12-Bit Voltage Output DAC
Programmable Internal Reference
Programmable Settling Time:
- 1 µs in Fast Mode
- 3.5 µs in Slow Mode
Compatible With TMS320 and SPI™ Serial Ports
Differential Nonlinearity . . . <0.5 LSB Typ
Monotonic Over Temperature

12-Bit Voltage Output DAC
Programmable Internal Reference
Programmable Settling Time:
- 1 µs in Fast Mode
- 3.5 µs in Slow Mode
Compatible With TMS320 and SPI™ Serial Ports
Differential Nonlinearity . . . <0.5 LSB Typ
Monotonic Over Temperature

The TLV5636 is a 12-bit voltage output DAC with a flexible 4-wire serial interface. The serial interface allows glueless interface to TMS320 and SPI™, QSPI™, and Microwire™ serial ports. It is programmed with a 16-bit serial string containing 4 control and 12 data bits.

The resistor string output voltage is buffered by a x2 gain rail-to-rail output buffer. The programmable settling time of the DAC allows the designer to optimize speed vs power dissipation. With its on-chip programmable precision voltage reference, the TLV5636 simplifies overall system design.

Because of its ability to source up to 1 mA, the reference can also be used as a system reference. Implemented with a CMOS process, the device is designed for single supply operation from 2.7 V to 5.5 V. It is available in an 8-pin SOIC and 8-pin MSOP package to reduce board space in standard commercial and industrial temperature ranges.

The TLV5636 is a 12-bit voltage output DAC with a flexible 4-wire serial interface. The serial interface allows glueless interface to TMS320 and SPI™, QSPI™, and Microwire™ serial ports. It is programmed with a 16-bit serial string containing 4 control and 12 data bits.

The resistor string output voltage is buffered by a x2 gain rail-to-rail output buffer. The programmable settling time of the DAC allows the designer to optimize speed vs power dissipation. With its on-chip programmable precision voltage reference, the TLV5636 simplifies overall system design.

Because of its ability to source up to 1 mA, the reference can also be used as a system reference. Implemented with a CMOS process, the device is designed for single supply operation from 2.7 V to 5.5 V. It is available in an 8-pin SOIC and 8-pin MSOP package to reduce board space in standard commercial and industrial temperature ranges.

open-in-new

Andere Präzisions-DACs (≤ 10 MSPS) suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	TLV5636 - 2.7-V To 5.5-V Low Power 12-Bit DAC With Internal Ref & Power Down datasheet (Rev. C)		08 Apr 2004

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Berechnungstool

ANALOG-ENGINEER-CALC — Rechner für Analogtechniker

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)

Optionen anzeigen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

Optionen anzeigen

Gehäuse	Pins	Herunterladen
SOIC (D)	8	Optionen anzeigen
VSSOP (DGK)	8	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

TLV5636

DAC mit seriellem Eingang, 12 Bit, 1 us, programmierbare Int. Ref., Einschwingzeit

TLV5636

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

ANALOG-ENGINEER-CALC — Rechner für Analogtechniker

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos